Extron electronic MTP manual Installation, cont’d, Shift the jumper to the alternate location

Page 9

Installation, cont’d

5.	Locate the jumper blocks (figure 2-3) on the video board.
	Shift the jumper to the alternate location.
Mono (default jumper position)
Compatible with new model transmitter/receivers.
Cannot remotely power transmitter/receiver
Transmitter Front Panel			Receiver Front Panel

TransmitterReceiver Rear Panel

Rear Panel

Stereo

Compatible with old model transmitter/receivers.

Can remotely power transmitter/receiver.

Figure 2-3 — Video board jumper locations

6. Reinstall the audio board and secure it in place with the screws removed in step 4.

7. If the receiver is an audio unit, locate the jumper block on the audio board (figure 2-4). Shift the jumper to the alternate location.

Receiver Front Panel

Mono (default jumper position)

Compatible with new model transmitters.

Mono audio.

Cannot remotely power transmitter

Stereo

Compatible with old model transmitters.

Stereo audio.

Can remotely power transmitter.

Receiver Rear Panel

Figure 2-4 — Receiver audio board jumper locations

The jumper locations and functions are the same whether the receiver is equipped with captive screw or RCA audio connectors.

8. Replace the cover and the four screws removed in step 1.

2-4

VersaTools® MTP Series • Installation

VersaTools® MTP Series • Installation

2-5

Image 9

Contents VersaTools MTP Series Extron’s Warranty PrecautionsFCC Class a Notice Table of Contents One Table of Contents, cont’dIntroduction VersaTools MTP SeriesAbout the MTP Transmitters and Receivers IntroductionTP Cable Advantages Transmission DistanceInstallation TwoIntroduction, cont’d Installation Signal Jumpers for Generational CompatibilitySetting the jumpers on non AAP models Shift the jumper to the alternate location Installation, cont’dCover to the MTP figure Setting the jumpers on AAP transmittersInstallation, cont’d Mounting Options Tabletop use all except AAP modelsRack mounting all except AAP models Frame mounting AAP models Furniture or projector mounting all except AAP modelsTransmitter input connections Panel Features and ConnectionsMTP Receivers Transmitter/receiver throughput connectionsTP cable termination Power connection all modelsImportant. The ideal length is 3/16 5 mm Receiver output connectionsOperation ThreeTroubleshooting Skew Delay Compensation Front Panel FeaturesAAppendix a Reference InformationSpecifications Specifications, Part Numbers, and AccessoriesSpecifications, Part Numbers, Accessories, cont’d Audio output audio models A, AV SVA models onlyGeneral Accessories AAP accessoriesCables/connectors Skew compensation solutionsSpecifications, Part Numbers, Accessories, cont’d