Extron electronic XTP T HDMI manual Operation, XTP T Hdmi Front Panel Indicators, Input indicators

Page 19

Operation

After all transmitters, all receivers, and their connected devices are powered up, the system is fully operational. If any problems are encountered, verify that the cables are routed and connected properly. If problems persist, call the Extron S3 Sales & Technical Support Hotline. See the contact numbers on the last page of this guide for the nearest Extron office.

XTP T HDMI Front Panel Indicators

 

 

INPUT

 

CONFIG

SIGNAL

HDMI AUDIO

AUDIO SIGNAL CLIP

HDCP

ANALOG AUDIO

 

 

 

 

 

XTP T HDMI

a b

Figure 12. XTP T HDMI Front Panel Features

APower LED — Lights when power is applied to the device from the power supply or remotely from an XTP Power Injector or XTP matrix switcher. There are two Power LED indicators, one on left side of the front panel and one on the left side of the rear panel.

BInput indicators

Signal LED — Lights when an active video signal is detected from the source. HDCP LED — Lights when the input signal is encrypted.

HDMI Audio LED — Lights when the HDMI audio input is selected. Analog Audio LED — Lights when the analog audio input is selected.

Audio Signal Clip LED — Lights when the analog audio input signal remains above -3 dBFS. The LED remains lit for 200 milliseconds after the signal falls below -3 dBFS.

XTP R HDMI Front Panel Indicators

 

XTP

 

AUDIO

 

CONFIG

SIGNAL

HBR

BITSTREAM

LPCM

 

 

 

 

 

HDCP

HDMI

S/PDIF

ANALOG

 

 

 

 

XTP R HDMI

a b c

Figure 13. XTP R HDMI Front Panel Features

APower LED — Lights when power is applied to the device from the power supply or remotely from an XTP Power Injector or XTP matrix switcher, such as an

XTP CrossPoint. There are two Power LED indicators, one on left side of the front panel and one on the left side of the rear panel.

BXTP indicators

Signal LED — Lights when an active XTP input signal is received.

HDCP LED — Lights when the input signal is encrypted.

XTP T HDMI Transmitter and XTP R HDMI Receiver • Installation 13

Image 19
Contents XTP T Hdmi XTP R Hdmi Safety Instructions English Chinese Simplified(简体中文) Registered Trademarks FCC Class a NoticeNotifications Specifications AvailabilitySoftware Commands Conventions Used in this GuideContents XTP T Hdmi Transmitter and XTP R Hdmi Receiver Contents About This Guide IntroductionAbout the XTP Hdmi Transmitter and Receiver Typical XTP Hdmi Transmitter and Receiver Matrix Application Key FeaturesXTP T Hdmi Transmitter and XTP R Hdmi Receiver Introduction XTP T Hdmi Rear Panel Connectors Installation OperationCabling RS-232 IR XTP R Hdmi Connectors XTP R Hdmi Rear Panel ConnectorsAudio Output Wiring Front Panel Configuration PortHdmi LockIt Making ConnectionsSupported cables TP Cable Termination and RecommendationsCable recommendations RS-232 and IR Communication Wiring the RS-232 and IR ConnectorLocal power Power ConnectionTypical Point-to-Point Application with Remote Power Remote powerXTP indicators XTP T Hdmi Front Panel IndicatorsXTP R Hdmi Front Panel Indicators Input indicatorsAudio indicators Hdmi Audio SwitchAudio Output Audio Input Format Reset ModesReset Mode Summary Audio Output OverviewHost-to-Device and Device-to-Host Communication SIS Configuration ControlHost Device Connection SIS Programming GuideUsing the Command and Response Table for SIS Commands Error ResponsesSymbol definitions X2@ Edid Emulation Table where X2@ = the SIS valueAudio Configuration Command and Response Tables for Transmitter SIS CommandsAdvanced Configuration Relay control Command and Response Tables for Receiver SIS CommandsVolume control Audio muteQuery Hdcp output Installing the XTP System Configuration Software XTP System Configuration SoftwareTo install the software from the DVD Connection Using the XTP System Configuration SoftwareTo download the software from the website Transmitter device settings Transmitter ConfigurationEdid Minder Screen Edid MinderTo clear the currently applied filters To use a filter or combination of filtersReceiver Device Settings Screen Receiver ConfigurationMounting Kits Reference InformationMounting Tabletop MountingUpdating Firmware with Firmware Loader Installing Firmware LoaderDownloading Extron Firmware Loader Downloading Firmware from the Extron Website Downloading FirmwareAdd Device... Dialog Box Installing Firmware with Firmware LoaderExtron Warranty

XTP T HDMI, XTP R HDMI specifications

Extron Electronics is a renowned manufacturer of advanced technology solutions for the audiovisual industry. Among their cutting-edge products is the XTP R HDMI and XTP T HDMI, both of which play pivotal roles in signal transmission and distribution within complex AV environments.

The Extron XTP R HDMI is a powerful receiver designed to work seamlessly with Extron’s XTP Systems. This device offers robust HDMI signal processing and is capable of transmitting high-definition video and audio signals over long distances using standard twisted pair cabling. One of its main features is the ability to support resolutions up to 4K at 60 Hz, including HDCP 2.2 compliance, which is essential for transmitting protected content. The XTP R HDMI also includes various audio extraction options, allowing users to separate audio from the HDMI signal for independent audio processing.

On the other hand, the XTP T HDMI serves as a transmitter within the same ecosystem, designed to convert HDMI video and audio signals into a format suitable for long-distance transmission. This device also supports 4K resolution and comes with a variety of input options that can cater to diverse installation needs. The XTP T HDMI is equipped with scaling capabilities, enabling users to select a preferred output resolution to match display capabilities, ensuring optimal performance in varied AV environments.

One of the standout technologies included in both the XTP R HDMI and XTP T HDMI is the Extron XTP technology, which provides a robust and reliable way to distribute AV signals over a single twisted pair cable. This technology allows signals to travel distances up to 330 feet (100 meters) without compromising signal quality. Additionally, both units support various formats, including HDMI, allowing for comprehensive compatibility with various sources and displays.

The XTP systems offer flexible setup options with features such as EDID communication, which ensures that the source device can communicate effectively with the display for the best possible image quality. Furthermore, integration with Extron’s proprietary Global Configurator software facilitates simplified configuration and programming, leading to smoother installations and management.

In summary, the Extron XTP R HDMI and XTP T HDMI are essential components for professional AV setups, providing excellent performance in signal transmission with advanced features and technologies that ensure superior integration and functionality in diverse applications.