Extron electronic XTP T HDMI manual Reference Information, Tabletop Mounting, Mounting Kits

Page 35

Reference

Information

This section contains mounting information and instructions for updating firmware. Topics in this section include:

•Mounting

•Updating Firmware with Firmware Loader

Mounting

The XTP T HDMI and the XTP R HDMI can be placed on a tabletop or mounted in a rack or underneath a desk.

Tabletop Mounting

Attach the provided rubber feet to the bottom four corners of the enclosure.

Mounting Kits

Mount the unit using any optional compatible rack shelf or mounting kit listed on the Extron website (www.extron.com), in accordance with the directions included with the kit. For rack-mounting, see UL guidelines for rack-mounted devices below.

UL guidelines for rack-mounted devices

The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of the XTP T HDMI and XTP R HDMI in a rack.

1.Elevated operating ambient temperature — If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature, Therefore, install the XTP T HDMI and XTP R HDMI in an environment compatible with the maximum ambient temperature

(Tma = +122 ˚F, +50 ˚C) specified by Extron.

2.Reduced air flow — Install the equipment in a rack so that the amount of air flow required for safe operation of the equipment is no compromised.

3.Mechanical loading — Mount the equipment in the rack so that a hazardous condition is not achieved due to uneven mechanical loading.

4.Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have an overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

5.Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (for example, the use of power strips).

XTP T HDMI Transmitter and XTP R HDMI Receiver • Reference Information 29

Page 34 Page 36
Image 35
Page 34 Page 36
Contents XTP T Hdmi XTP R Hdmi Safety Instructions English Chinese Simplified（简体中文） Registered Trademarks FCC Class a NoticeNotifications Specifications AvailabilitySoftware Commands Conventions Used in this GuideContents XTP T Hdmi Transmitter and XTP R Hdmi Receiver Contents About the XTP Hdmi Transmitter and Receiver IntroductionAbout This Guide Typical XTP Hdmi Transmitter and Receiver Matrix Application Key FeaturesXTP T Hdmi Transmitter and XTP R Hdmi Receiver Introduction Cabling Installation OperationXTP T Hdmi Rear Panel Connectors RS-232 IR XTP R Hdmi Connectors XTP R Hdmi Rear Panel ConnectorsAudio Output Wiring Front Panel Configuration PortHdmi LockIt Making ConnectionsCable recommendations TP Cable Termination and RecommendationsSupported cables RS-232 and IR Communication Wiring the RS-232 and IR ConnectorLocal power Power ConnectionTypical Point-to-Point Application with Remote Power Remote powerXTP indicators XTP T Hdmi Front Panel IndicatorsXTP R Hdmi Front Panel Indicators Input indicatorsAudio indicators Hdmi Audio SwitchAudio Output Audio Input Format Reset ModesReset Mode Summary Audio Output OverviewHost-to-Device and Device-to-Host Communication SIS Configuration ControlHost Device Connection SIS Programming GuideSymbol definitions Error ResponsesUsing the Command and Response Table for SIS Commands X2@ Edid Emulation Table where X2@ = the SIS valueAudio Configuration Command and Response Tables for Transmitter SIS CommandsAdvanced Configuration Relay control Command and Response Tables for Receiver SIS CommandsVolume control Audio muteQuery Hdcp output To install the software from the DVD XTP System Configuration SoftwareInstalling the XTP System Configuration Software To download the software from the website Using the XTP System Configuration SoftwareConnection Transmitter device settings Transmitter ConfigurationEdid Minder Screen Edid MinderTo clear the currently applied filters To use a filter or combination of filtersReceiver Device Settings Screen Receiver ConfigurationMounting Kits Reference InformationMounting Tabletop MountingDownloading Extron Firmware Loader Installing Firmware LoaderUpdating Firmware with Firmware Loader Downloading Firmware from the Extron Website Downloading FirmwareAdd Device... Dialog Box Installing Firmware with Firmware LoaderExtron Warranty

XTP T HDMI, XTP R HDMI specifications

Extron Electronics is a renowned manufacturer of advanced technology solutions for the audiovisual industry. Among their cutting-edge products is the XTP R HDMI and XTP T HDMI, both of which play pivotal roles in signal transmission and distribution within complex AV environments.

The Extron XTP R HDMI is a powerful receiver designed to work seamlessly with Extron’s XTP Systems. This device offers robust HDMI signal processing and is capable of transmitting high-definition video and audio signals over long distances using standard twisted pair cabling. One of its main features is the ability to support resolutions up to 4K at 60 Hz, including HDCP 2.2 compliance, which is essential for transmitting protected content. The XTP R HDMI also includes various audio extraction options, allowing users to separate audio from the HDMI signal for independent audio processing.

On the other hand, the XTP T HDMI serves as a transmitter within the same ecosystem, designed to convert HDMI video and audio signals into a format suitable for long-distance transmission. This device also supports 4K resolution and comes with a variety of input options that can cater to diverse installation needs. The XTP T HDMI is equipped with scaling capabilities, enabling users to select a preferred output resolution to match display capabilities, ensuring optimal performance in varied AV environments.

One of the standout technologies included in both the XTP R HDMI and XTP T HDMI is the Extron XTP technology, which provides a robust and reliable way to distribute AV signals over a single twisted pair cable. This technology allows signals to travel distances up to 330 feet (100 meters) without compromising signal quality. Additionally, both units support various formats, including HDMI, allowing for comprehensive compatibility with various sources and displays.

The XTP systems offer flexible setup options with features such as EDID communication, which ensures that the source device can communicate effectively with the display for the best possible image quality. Furthermore, integration with Extron’s proprietary Global Configurator software facilitates simplified configuration and programming, leading to smoother installations and management.

In summary, the Extron XTP R HDMI and XTP T HDMI are essential components for professional AV setups, providing excellent performance in signal transmission with advanced features and technologies that ensure superior integration and functionality in diverse applications.
Top Page Image Contents