Extron electronic TSC 100 Installation and Operation, Rack Mounting the TSC, Connections

Installation and Operation

Rack Mounting the TSC 100

In addition to using the TSC 100 on a desktop, it can also be rack mounted. To rack mount the TSC 100, follow the installation instructions below.

For optional rack mounting, mount the TSC 100 on a standard, 19" 1U Rack Shelf (Extron part #60-190-01) (figure 1) in one of

Connections

All connections, including power, input and output, and control, are on the rear panel of the TSC 100. See figure 2.

2 3 4

four locations on the front of the rack.

1.	If feet were previously installed on the bottom of the
	TSC 100, remove them.
2.	Mount the TSC on the rack shelf using two 4-40 x 3/16”
	screws in opposite (diagonal) corners to secure the
	TSC 100 to the shelf.
3.	Install blank panel(s) or other unit(s) to the rack shelf.

	1	2
POWER	I
	N
9 V
1A MAX	P
1	U
	T
	S
	COMPOSITE	S-VIDEO

	COMPOSITE
O
U
T		5
P
U
T
S
	S-VIDEO	RS-232/422

4.Insert the shelf into the rack, aligning the holes in the shelf with those of the rack.

1U Universal Rack Shelf

1/2 Rack Width Front False

Faceplate

1/4 Rack Width Front False

Faceplate

Both front false faceplates use 2 screws.

(2) 4-40 x 3/16" Screws

Use 2 mounting holes on opposite corners.

Figure 1 — Rack mounting the TSC 100

5.Secure the shelf to the rack using the supplied machine screws.

This shelf can only be mounted in the front of the rack.

6 7 8

Figure 2 — TSC 100 rear panel

Rear panel connections

1Power connection — Plug the external 9 VDC power supply into this connector. The power supply is included with the unit.

2Input 1 composite BNC connector — Connect one BNC female connector for composite video input.

3Input 2 S-video 4-pin mini DIN connector — Connect one 4-pin mini DIN connector for S-video input.

4Output composite BNC connector — Connect one BNC female connector for composite video output.

5RS-232/422 connector — Use this connector for RS-232 or RS-422 communications and control. Connect an RS-232 or RS-422 device (control system or PC computer) for remote switching between inputs and remote centering control to this female 9-pin D connector (see below).

5	1	Pin	RS-232	Description	RS-422 Description
		1	—	—	—	—
9	6	2	Tx	Transmit data	Tx-	Transmit data (-)
		3	Rx	Receive data	Rx-	Receive data (-)
Female
		4	—	—	—	—
1	5
		5	Gnd	Signal ground	Gnd	Signal ground
		6	—	—	—	—
		7	—	—	Rx+	Receive data (+)
6	9	8	—	—	Tx+	Transmit data (+)
	Male	9	—	—	—	—

2-2 TSC 100 • Installation and Operation TSC 100 • Installation and Operation 2-3