POWER | INPUT | ||||
| VIDEO | ||||
12V |
| ||||
|
| ||||
0.5A MAX | AUDIO | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OUTPUT
DC Power Cord
Captive Screw
Connector
Ground
+12 VDC
Smooth | Ridges |
|
|
|
|
| Captive |
|
|
|
|
| |||
A | A |
|
|
|
|
| |
|
|
|
|
| Screw | ||
|
|
|
|
|
|
| Connector |
|
| SECTION | |||||
Power Supply |
|
|
|
|
| Tie Wrap | |
|
|
|
|
| |||
|
|
|
|
| |||
Output Cord |
|
|
|
|
|
| |
3"
16 (5 mm) Max.
External
Power Supply
(12 VDC, 1 A )
AC Power Cord
Figure 3. Power Supply Wiring
CAUTION: Always use a power supply supplied or specified by Extron. Use of an unauthorized power supply voids all regulatory compliance certification and may cause damage to the supply and the
TLP VIM.
Extron power supplies are certified to UL/CSA 60950‑1 and are classified as LPS (limited power source). Use of a non‑LPS or unlisted power supply will void all regulatory compliance certification.
Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling spaces or in wall cavities. The power supply is to be located within the same vicinity as the Extron A/V processing equipment in an ordinary location, Pollution Degree 2, secured to the equipment rack within the dedicated closet, podium or desk.
The installation must always be in accordance with the applicable provisions of National Electrical Code ANSI/NFPA 70, article 75, and the Canadian Electrical Code, part 1, section 16. The power supply shall not be permanently fixed to building structure or similar structure.
CAudio input
Tip | Tip |
| Ring |
Sleeve | Sleeve |
Unbalanced Input | Balanced Input |
Figure 4. Audio Input Connector Wiring
TLP VIM • Installation and Operation | 5 |