Extron electronic manual Installation Overview, Mounting the TLP VIM

Page 7

Installation and

Operation

This chapter shows how to install and operate the TLP VIM Video Input Module.

Topics that are covered include:

zz Installation Overview

zz Mounting the TLP VIM

zz TLP VIM Front and Rear Panel Features

zz Operation

Installation Overview

To install and set up the TLP VIM, follow these steps:

1.Turn all equipment off. Make sure the video sources (DSS, cable boxes, PC, laptop, or other devices), the TLP VIM, and the touchpanel are turned off and disconnected from power sources.

2.Mount the TLP VIM, see "Mounting the TLP VIM", below.

3.Attach the cables, see "TLP VIM Front and Rear Panel Features" on page 4.

4.Connect power cords and turn on the devices, see "Operation" on page 6 .

Mounting the TLP VIM

The TLP VIM includes hook and loop fasteners so that it can be securely mounted on or under a table or podium near to the touchpanel.

Shut off all power to connected devices, then mount the TLP VIM as required.

TLP VIM • Installation and Operation

3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents TLP VIM Instrucciones de seguridad Español Safety Instructions EnglishConsignes de Sécurité Français Sicherheitsanleitungen DeutschNotational Conventions Used in this Guide Iv TLP VIM Contents About the TLP VIM IntroductionTLP VIM Mounting the TLP VIM Installation OverviewFront TLP VIM Front and Rear Panel FeaturesPower Supply Wiring Video Inputs OperationEnhanced Skew-Free A/V UTP Cable Part Number Description Part NumberSync Specifications VideoVideo input Video outputAudio output Audio inputGeneral CE, c-UL, UL Extron Warranty Extron Middle East
Top Page Image Contents