Extron electronic CIA111, CIA114 Installation Overview, Front Panel Features and Cabling

Page 7
Monitor Output connector — Plug a local monitor into this female 15-pin HD connector.

Installation

Installation Overview

CInstallation and service must be performed by authorized personnel only. UL Listed electrical boxes are recommended. See "UL Requirements", later in this chapter.

To install and set up a CIA111, CIA114, or CIA114F5 interface, follow these steps:

1Turn all of the equipment off. Make sure that the computer, the interface, and the output devices (projector/ monitor, speakers) are all turned off and disconnected from the power source.

2If applicable, prepare the site (see "Mounting the Interfaces", later in this chapter, for information on your specific installation).

3Attach the cables. See "Front Panel Features and Cabling" and "Side Panel Features and Cabling", later in this chapter.

4Set the rear panel Mode Select DIP switches. See "Side Panel Features and Cabling" in this chapter as a guide.

5Test the installation by connecting power cords and turning on the projector/monitor, the audio device, the interface, and the computer.

6The picture should now appear, and sound should be audible. If not, ensure that all devices are plugged in and receiving power. Check the cabling and the DIP switch settings, and make adjustments as needed.

7Disconnect power from all the devices.

8Mount the interface into the wall or floor box (see "Mounting the Interfaces", later in this chapter, to address your specific requirements). If optional MAAP devices are being installed (CIA111 only), see "Mounting the optional MAAP device(s)", later in this chapter.

9Restore power to the devices.

Front Panel Features and Cabling

2

1

 

 

2

1

IMAGE SHIFT

NO MONITOR

 

 

IMAGE SHIFT

NO MONITOR

MONITOR OUTPUT

 

 

MONITOR OUTPUT

3

 

 

 

3

 

COMPUTER INPUT

 

 

COMPUTER INPUT

4

 

 

 

4

 

AUDIO INPUT

 

 

 

AUDIO INPUT

 

5

 

 

 

5

 

 

 

 

CIA111

 

CIA114

CIA111

6

7

 

CIA114

6

 

 

 

1

 

 

 

CIA114F5

 

NO

 

 

6

 

 

MONITOR

 

 

 

 

2

IMAGE

 

 

AUDIO

 

 

SHIFT

 

 

 

 

 

 

INPUT

 

 

 

 

 

 

 

 

MONITOR

COMPUTER

 

 

 

 

OUTPUT

INPUT

 

 

CIA114F5

3

4

5

 

 

 

 

Figure 2-1 — CIA111, CIA114, and CIA114F5 front panels

A

No Monitor (monitor emulation) button and LED — If you

 

are not using a local monitor, press this button to turn on

 

the monitor emulation feature, which provides proper ID bit

 

termination on the local monitor output.

On — ID bits 4 and 11 are tied to ground.

Off — ID bits 4 and 11 are unterminated.

The LED lights to indicate that the feature is on.

B

Image Shift button — While viewing the displayed image,

 

press this rocker button to adjust the horizontal positioning of

 

the image on screen. Pressing the left (lower on CIA114F5) side

 

of the button moves the image to the left and pressing the right

 

(upper on CIA114F5) side of the button moves it to the right.

C

D Computer Input connector — Plug a computer video source into this female 15-pin HD connector.

2-2

CIA111 and CIA114 • Installation and Operation

CIA111 and CIA114 • Installation and Operation

2-3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Wall Box and Floor Box Mountable Interfaces User’s ManualExtron’s Warranty PrecautionsFCC Class a Notice 安全须知 中文Appendix a Reference Information Chapter Two Installation and OperationCIA111 and CIA114 Computer Video Interface Table of Contents, contdAbout the CIA111, CIA114, and CIA114F5 FeaturesIntroduction About this ManualNo Monitor monitor emulation button and LED If you InstallationInstallation Overview Front Panel Features and CablingSide Panel Features and Cabling Installation, cont’dPower adapter connection Plug the included power If the image does not appear or there is no sound Pre-installation Testing and TroubleshootingIf the image is not displayed correctly Mounting the CIA111 or CIA114 When the image is displayed correctlyPreparing the site and installing the wall box Mounting the InterfacesMounting optional Maap devices CIA111 only Attaching the wall box to a wall studMounting the interface to the wall box Mounting the CIA114F5Mounting the interface to the floor box Preparing the site and cablesReference Information SpecificationsIncluded parts Reference Information, cont’dPart Numbers CIA interface part numbersTemplates AccessoriesCables and Adapters Surface CUT-OUT Area for Furniture Mount
Related manuals
Manual 2 pages 37.19 Kb Manual 2 pages 52.73 Kb Manual 2 pages 48.11 Kb

CIA114F5, CIA111, CIA114 specifications

Extron Electronics is a renowned name in the AV control and distribution industry, and their products are designed to streamline and enhance audiovisual systems. Among their offerings are the CIA114F5, CIA111, and CIA114, each tailored to meet specific user needs while encapsulating cutting-edge technology and features.

The CIA114F5 is a high-performance, five-channel amplifier designed for distributed audio applications. One of its standout features is its ability to deliver 30 watts per channel, allowing for exceptional audio clarity and power across multiple zones. The amplifier utilizes Extron's patented Class D output technology, ensuring high efficiency and reduced heat generation, which translates to a longer lifespan and lower operational costs. The CIA114F5 also includes built-in signal processing capabilities, such as equalization and filtering, which help optimize audio performance in various environments.

Moving to the CIA111, this model is a compact, single-channel amplifier, perfect for smaller setups or individual zones in larger systems. It provides 25 watts of power, making it suitable for classrooms, conference rooms, and similar venues where clarity in sound is paramount. The CIA111 features a highly efficient design and is equipped with Extron's exclusive Energy Saver technology, which minimizes power consumption when the amplifier is not in use. This not only extends the product's life but also has a positive impact on overall energy costs.

Lastly, the CIA114 is another versatile component that provides four output channels, each capable of delivering 30 watts. This model stands out with its versatile installation options, which include mounting on a rack or against a wall. The CIA114 uses advanced circuit design to minimize distortion and provide a rich sound stage, enhancing the listening experience in various applications. Additionally, its compatibility with Extron's control systems allows for seamless integration into existing AV setups, empowering users with effortless control over audio distribution.

In summary, Extron's CIA114F5, CIA111, and CIA114 amplifiers represent the pinnacle of reliability and performance in distributed audio systems. With features like class D amplification, built-in processing, and energy-saving technologies, these models cater to a broad range of AV needs, ensuring that users receive the best possible audio experience in any environment.
Top Page Image Contents