Extron electronic CIA111, CIA114F5 user manual Pre-installation Testing and Troubleshooting

Page 9

Installation, cont’d

E

Mode Select DIP switches — Set these switches to select

 

settings for horizontal position control, sync format, monitor

 

emulation, and Auto Power.

 

1

— Image Shift control

 

 

On —

The Image Shift button is enabled and shifts

 

 

 

the location of the image when pressed

 

 

 

(default).

 

 

Off —

The Image Shift button is disabled and does

 

 

 

not shift the location of the image when pressed.

 

2

— Output sync format (sync on green)

 

 

On —

The interface outputs RGsB video.

 

 

Off —

The interface outputs RGBS or RGBHV video

 

 

 

(default). See switch 3, on page 2-6, to select

 

 

 

between RGBS and RGBHV.

 

3

— Output sync format (RGBS or RGBHV)

 

 

On —

The interface outputs RGBHV video (default).

 

 

Off —

The interface outputs RGBS video.

 

4

— No Monitor at Power Up

 

 

On —

The interface powers up with No Monitor enabled

 

 

 

(default).

 

 

Off —

The interface powers up with No Monitor disabled.

 

5

— Auto Power Disable

 

 

On —

The interface does not power up or down

 

 

 

automatically; it stays on unless you remove power

 

 

 

by disconnecting the power cable.

 

 

Off —

The interface powers up automatically when it

 

 

 

senses an input sync signal, and turns itself off

 

 

 

when the sync signal is removed.

 

6

— Not used

Pre-installation Testing and Troubleshooting

Before installing the interface into the wall or furniture, test the system to verify that the connections and settings are correct.

Apply power to the interface. If an active sync signal is present on the input or if the auto-power feature is disabled, the Power LED on the interface lights to indicate that the interface is receiving power.

If the LED does not light, check the wiring at both the interface and the power supply, and ensure that the power supply is connected to a power source.

If the image does not appear or there is no sound

1.

Make sure that all the devices are powered on.

2.

Ensure that the connectors are wired correctly at both

 

ends of the cables. Audio cables must be wired for an

 

unbalanced stereo input signal and for a balanced or an

 

unbalanced stereo output signal.

3.

If input is from a laptop computer and no picture appears,

 

check the computer’s user’s guide or contact Extron to

 

determine if special commands are required to output

 

video to the external video port. Also, many laptops’

 

screens shut off after the external video port is activated.

4.

Call the Extron S3 Sales and Technical Support Hotline if

 

the image still does not appear or there is no sound.

If the image is not displayed correctly

1.

Make sure the correct input and output cables are being

 

used and that they are not damaged.

2.

Check the DIP switch settings to make sure the interface is

 

putting out the correct sync format.

3.

If the picture appears and is stable, but it has ghosting

 

or blooming, verify that the video input is properly

 

terminated. If the problem is not resolved by changing the

 

termination, try using a different input cable. Poor quality

 

or damaged cable can cause ghosting or blooming.

4.

If the picture has a white, ghosted image on the right side

 

of the lines/characters, the sharpness may be set to high.

 

Use a Tweeker or screwdriver to turn the sharpness control

 

counterclockwise.

5.

If the picture is still not displayed correctly, call the Extron

 

S3 Sales and Technical Support Hotline.

2-6

CIA111 and CIA114 • Installation and Operation

CIA111 and CIA114 • Installation and Operation

2-7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Wall Box and Floor Box Mountable Interfaces User’s ManualExtron’s Warranty PrecautionsFCC Class a Notice 安全须知 中文Appendix a Reference Information Chapter Two Installation and OperationCIA111 and CIA114 Computer Video Interface Table of Contents, contdIntroduction FeaturesAbout this Manual About the CIA111, CIA114, and CIA114F5Installation Overview InstallationFront Panel Features and Cabling No Monitor monitor emulation button and LED If youInstallation, cont’d Side Panel Features and CablingPower adapter connection Plug the included power Pre-installation Testing and Troubleshooting If the image does not appear or there is no soundIf the image is not displayed correctly Preparing the site and installing the wall box When the image is displayed correctlyMounting the Interfaces Mounting the CIA111 or CIA114Mounting optional Maap devices CIA111 only Attaching the wall box to a wall studMounting the interface to the wall box Mounting the CIA114F5Mounting the interface to the floor box Preparing the site and cablesReference Information SpecificationsPart Numbers Reference Information, cont’dCIA interface part numbers Included partsAccessories TemplatesCables and Adapters Surface CUT-OUT Area for Furniture Mount
Related manuals
Manual 2 pages 37.19 Kb Manual 2 pages 52.73 Kb Manual 2 pages 48.11 Kb

CIA114F5, CIA111, CIA114 specifications

Extron Electronics is a renowned name in the AV control and distribution industry, and their products are designed to streamline and enhance audiovisual systems. Among their offerings are the CIA114F5, CIA111, and CIA114, each tailored to meet specific user needs while encapsulating cutting-edge technology and features.

The CIA114F5 is a high-performance, five-channel amplifier designed for distributed audio applications. One of its standout features is its ability to deliver 30 watts per channel, allowing for exceptional audio clarity and power across multiple zones. The amplifier utilizes Extron's patented Class D output technology, ensuring high efficiency and reduced heat generation, which translates to a longer lifespan and lower operational costs. The CIA114F5 also includes built-in signal processing capabilities, such as equalization and filtering, which help optimize audio performance in various environments.

Moving to the CIA111, this model is a compact, single-channel amplifier, perfect for smaller setups or individual zones in larger systems. It provides 25 watts of power, making it suitable for classrooms, conference rooms, and similar venues where clarity in sound is paramount. The CIA111 features a highly efficient design and is equipped with Extron's exclusive Energy Saver technology, which minimizes power consumption when the amplifier is not in use. This not only extends the product's life but also has a positive impact on overall energy costs.

Lastly, the CIA114 is another versatile component that provides four output channels, each capable of delivering 30 watts. This model stands out with its versatile installation options, which include mounting on a rack or against a wall. The CIA114 uses advanced circuit design to minimize distortion and provide a rich sound stage, enhancing the listening experience in various applications. Additionally, its compatibility with Extron's control systems allows for seamless integration into existing AV setups, empowering users with effortless control over audio distribution.

In summary, Extron's CIA114F5, CIA111, and CIA114 amplifiers represent the pinnacle of reliability and performance in distributed audio systems. With features like class D amplification, built-in processing, and energy-saving technologies, these models cater to a broad range of AV needs, ensuring that users receive the best possible audio experience in any environment.
Top Page Image Contents