Extron electronic 10 PLUS, 8 PLUS user manual KP-10 Remote Control

Page 27

Configuring Features and Options

KP-10 Remote Control

The optional EXTRON KP-10 hard wired remote controller consists of a keypad, a 25 foot cable and a 25 pin D male connector that connects to the MANUAL REMOTE connector on the rear panel of the switcher (see drawing below).

With the KP-10 connected, all Model 8 PLUS and Model 10 PLUS front panel operations can be duplicated using keys 0 through 9 on the KP-10 keypad.

The KP-10 operates in parallel with the front panel and the RS-232 port. The Model 8/10 PLUS Switchers can be controlled from any one of these three sources and no one source has priority over the other.

The EXTRON part number for the KP-10 is 60-111-01.

1

2

3

4

5

6

7

8

9

1 0

Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual

Page A-2

Image 27

Contents Model 10 Plus Model 8 Plus Switchers Page Contents Following icons may be used in this manual Model 8/10 Plus Switcher Model 8/10 Plus Facts and Features IntroductionAbout This Manual Description of Features Specifications GeneralVideo Model 8/10 Plus Switcher Operation and Installation Front Panel Model 8/10 Switcher OperationRear Panel Connecting the Inputs Model 8/10 Plus Switcher Installation GuideSvhs VCR Output Select DIP Switch Setting Example Output Select DIP Switch Settings Changing the Baud Rate Bit, no parity, 1 stop bitBit, odd parity, 1 stop bit Triple Action SwitchingTM RGB Delay Model 8/10 Plus Switcher Connection to ComputerPage Model 8/10 Plus RS-232 Control Software Host/Switcher CommunicationsUsing the Command/Response Table Model 8/10 Plus RS-232 ControlDefinitions and Abbreviations Command/Response TableExample Commands and Responses Response Command To Host Description etcUsing the Software Installing the SoftwareModel 10 Plus Switcher w/PC RS-232 Control Page Configuring Features and Options Incandescent Lamp Circuits Manual Remote ConnectorKP-10 Remote Control IR-10 Infrared Remote Control Installing the 2U Shelf in a Rack Installing the Model 8/10 Plus Switcher on the ShelfRack Mounting BNC-4 HR Cable Accessories/Part Numbers