Extron electronic 10 PLUS, 8 PLUS user manual Rack Mounting, Installing the 2U Shelf in a Rack

Page 29

Configuring Features and Options

Rack Mounting

The Model 8 PLUS and Model 10 PLUS switchers can be rack-mounted using an optional 19" 2U Universal Rack Shelf, one switcher per shelf. The Extron Part Number for the Universal Rack Shelf is 60-032-01.

The installation procedure follows.

 

10-32 x 3/4

 

Screws

#10 Beveled

Use two screws to secure switcher to shelf

Washers

Installing the 2U Shelf in a Rack

Use the four 10-32 x 3/4 black screws and #10 black beveled washers to mount the 2U Shelf in the Rack.

Installing the Model 8/10 PLUS Switcher on the Shelf

The 2U Universal Rack Shelf is designed to enable the Model 8 PLUS or Model 10 PLUS Switcher to set on the shelf with the switcher's four feet extending through four holes. It is not necessary to attach the switcher to the shelf with screws.

Upon completion of this procedure, return to the Installation Guide in Chapter 2 and continue with the next step in the procedure.

Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual

Page A-4

Image 29
Contents Model 10 Plus Model 8 Plus Switchers Page Contents Following icons may be used in this manual Model 8/10 Plus Switcher About This Manual Model 8/10 Plus Facts and FeaturesIntroduction Description of Features Video SpecificationsGeneral Model 8/10 Plus Switcher Operation and Installation Front Panel Model 8/10 Switcher OperationRear Panel Connecting the Inputs Model 8/10 Plus Switcher Installation GuideSvhs VCR Output Select DIP Switch Setting Example Output Select DIP Switch Settings Bit, odd parity, 1 stop bit Changing the Baud RateBit, no parity, 1 stop bit Triple Action SwitchingTM RGB Delay Model 8/10 Plus Switcher Connection to ComputerPage Model 8/10 Plus RS-232 Control Using the Command/Response Table Host/Switcher CommunicationsModel 8/10 Plus RS-232 Control SoftwareExample Commands and Responses Command/Response TableResponse Command To Host Description etc Definitions and AbbreviationsUsing the Software Installing the SoftwareModel 10 Plus Switcher w/PC RS-232 Control Page Configuring Features and Options Incandescent Lamp Circuits Manual Remote ConnectorKP-10 Remote Control IR-10 Infrared Remote Control Rack Mounting Installing the 2U Shelf in a RackInstalling the Model 8/10 Plus Switcher on the Shelf BNC-4 HR Cable Accessories/Part Numbers