Extron electronic 68-388-01 manual Infrared Learning for System Control, Standard Features, Inputs

Page 7

Chapter 1 • Introduction and Features

Infrared Learning for System Control

The IR receiver window on the front panel also serves as a learning port to add IR signals from other sources to the System 5 panel functions. Then, when a panel function is selected, the learned IR signal is transmitted into the room through the hard-wired IR emitter, or the optional IR Broadcaster, to be received by the projector. IR commands for the projector can be associated with each of the Display buttons (Power, Mute and Mode) on the front panel as well as with each of the five input buttons. Thus the System 5 switcher can control the projector. Stored commands (learned or uploaded) in the System 5 memory are also effective when using the IR 40, SCP 100 or RS-232 controls.

As an example, IR commands for the projector shown in Figure 1-1 can be stored in the System 5 memory such that when the VID1 input is selected, the projector will switch to its composite video mode. Selecting VID2 input could send a command to tell the projector to switch to S-video mode.

Standard Features

•250 MHz bandwidth (-3 dB)

•Audio preamp with 2-channel stereo outputs

•Audio breakaway (switch audio and video separately, with RS-232)

•Audio input levels may be preset individually and then adjusted by the master volume control.

•Five Inputs - computer video, RGBS, RGBHV, composite video or S-video

•Internal audio amplifier - 12 watt/channel, with adjustable output

•Room control - relay control of lights, window shades, display screen, etc.

•Projector control - display power, mute, mode (learned IR commands)

•Learns IR remote commands - from a library or through the front panel

•Memory stores IR commands that are learned, or uploaded through a PC. (Procedure in Chapter 4.)

•RS-232 programming, with Simple Instruction Set (SIS)

•Triple-action switching (blank screen while switching between inputs)

•Special mounting brackets allow the System 5 to be mounted on a wall or under a table, plus standard brackets are included for rack-mounting.

Inputs

_______ The four rear panel inputs described here include a 5-pole, captive screw

connector for 2-channel stereo audio, balanced or unbalanced signals.

•Computer video input is provided on the front panel through a VGA (female HD 15 pin) connector (PC1). This allows for quick connection of a laptop computer without having to access the rear panel of the switcher.

•Computer video may also be connected through BNC connectors to the PC2 and PC3 inputs, through an interface, such as an RGB 406, as shown in Figure 1-1.

•The VID1 and VID2 inputs can be either composite or S-video signals, both through BNC connectors.

Outputs

•The System 5 provides video outputs for RGBS, RGBHV, Composite and S-video formats. One output is active at any one time.

•Audio preamp output for either balanced or unbalanced audio signals is available through a 5-pole, captive screw connector.

•An internal, 12 watt/channel audio amplifier drives non-powered speakers.

•Stored IR commands output through emitter or broadcaster.

Extron • System 5cr Switcher • User’s Manual

1-2

Page 6 Page 8
Image 7
Page 6 Page 8
Contents System 5cr Precautions Connections Setup Mode proceduresChapter One Introduction to System 5cr Introduction to System 5cr Controlling the System What is a System 5cr Switcher?Outputs Standard FeaturesInfrared Learning for System Control InputsSystem 5 with accessories and options Options and AccessoriesVideo input SpecificationsControl projector Rear Panel Connections Panel Connections Installation in a Rack, on a Wall or Under a TableVideo Input Connections Video Output Connections Audio Input Connections12VDC, 500mA output is provided on the Comm. IR Emitter port Audio Preamp Out Connection Connecting AccessoriesRoom/Relay Connector Comm Connector and Infrared EmitterUsing the System 5cr Front Panel Controls and Indicators Using the System 5crPower and Room 1b. Front panel controls and indicators PC Input Selection Buttons and IndicatorsPreset Audio Input Attenuation Levels Configuration Setup from the Front PanelEnter Setup Config Mode Clear ConfigurationsSelect format for VID1 and/or VID2 Learn Infrared Signals from other devices’ remote controlsRemote Operation See inset top, right To install batteries4Chapter Four Windows Control Software Program Help Installing Windows Control SoftwareExample of two Help screens for the System Program OperationRoom Relay Mode Latched/Momentary Power Up/Down Delay timesAuto Set Attenuators set all audio input to the same level Miscellaneous Options RGB Delay TimesSaving a Configuration to a File Downloading from Extron’s IR Projector LibraryLoading Projector Drivers Programming the System 5cr Host-to-System 5cr Instructions Remote Control Port RS-232Ascii Definitions and AbbreviationsAdvanced Instructions Reserved for Windows program BInstalling System 5cr Options System 5cr Options To IR Broadcaster To projector remote jack Following is a list of terms taken from Extron’s Glossary Glossary of termsLCD Index FCC Class a Notice Extron’s Warranty Extron ELECTRONICS, Asia

68-388-01 specifications

Extron Electronics has long been a prominent name in the AV integration industry, known for its innovation and quality products. One of the standout models in their product line is the Extron 68-388-01, a versatile and user-friendly solution designed to enhance various audiovisual experiences. This device exemplifies Extron's commitment to excellence, delivering robust performance and seamless integration for a variety of applications.

The Extron 68-388-01 is primarily an HDMI to RGB scaler designed for converting HDMI signals into high-quality RGB analog video outputs. This feature is particularly beneficial for environments where legacy analog display equipment is still in use, allowing for compatibility with modern HDMI sources without sacrificing signal quality. The device supports a wide range of resolutions up to 1920x1200, ensuring it meets the demands of high-definition content while maintaining clarity and detail.

A key feature of the 68-388-01 is its advanced scaling technology. Utilizing precise scaling algorithms, this device effectively adjusts the input signal to match the native resolution of the output display, minimizing artifacts and enhancing image quality. This technology is particularly useful in settings such as classrooms and conference rooms, where visual clarity is essential for effective communication.

Another notable characteristic of the Extron 68-388-01 is its user-friendly interface. Equipped with a straightforward front-panel control system, users can easily manage settings and configurations, making it suitable for both tech-savvy users and those less familiar with AV technology. Additionally, the device comes with Extron's proprietary software, allowing for remote management and configuration via a connected PC or network.

The build quality of the 68-388-01 is typical of Extron's reputation for durability and reliability. Designed for rack mounting, it fits seamlessly into existing AV installations while offering excellent thermal management and low power consumption. Its compact form factor enhances versatility, making it an ideal choice for a range of environments, from education to corporate and broadcast applications.

In conclusion, the Extron 68-388-01 stands out as an exceptional HDMI to RGB scaler, combining advanced features, robust performance, and ease of use. Its ability to bridge the gap between modern digital sources and legacy analog displays makes it an invaluable tool for any AV professional looking to create a flexible and future-proof installation.
Top Page Image Contents