Installation and Operation, cont’d
Euro Channel and Floor Box Versions
The RGB 460xi and RGB 468xi are available in a
Euro Channel (EC) version, the RGB 460xi is available in two floor box models (MK and FSR), and the RGB 468xi AKM UK is designed for Ackermann floor boxes. (See appendix A for part numbers.)
The front and rear panel features, cabling requirements, and testing/troubleshooting procedures are identical to the descriptions shown in this chapter for the wall box models. For installation instructions, see the RGB 400xi Series installation guide that addresses your specific requirements.
Mounting Adapter Plates (AAPs/MAAPs)
All AAPs/MAAPs should be mounted before the interface is tested or installed in a wall or furniture. Each AAP/MAAP has standoffs (screws built into the rear panel) and nuts/hex screws, which can be used to secure the AAP/MAAP to the interface.
1. Insert the AAP/MAAP standoffs into screw holes in the interface.
2.Using the
0The RGB 468 Mxi (not shown) mounts from
the front using hex screws.
The RGB 468xi (shown) mounts from the
rear using nuts.
MONITOR 
INPUT
ADSP
WITH
468
RGB
AUDIO
RGB 468xi
Mounting an adapter plate (AAP shown)
3. Repeat steps 1 and 2 to mount other AAPs/MAAPs.
Cover any openings in the interface with blank AAP/MAAP plates.