Extron electronic SCP 150L user manual Switch Function Button, Switch number locations

Page 17

Remote Communication, cont’d

Using the Switch/Function Button Table

Switches are assigned to specific buttons on the SCP, any attached remote control module (IRCM/RCM/ACM), or the IR 402 remote. Each time a button is pressed or released, or a knob is turned on the SCP or a control module, the switch number associated with that button appears on your PC terminal emulator screen (HyperTerminal, etc.) as part of the host response.

On most of the special function SIS commands, the switch number is the X? value that you enter as part of the command.

(See the Command/response table for special function SIS commands, earlier in this chapter.)

The following Switch/Function Button table shows which switch number is associated with each button or knob on the SCP, control module, or IR 402. In the Switch column, locate the switch number displayed on your terminal emulator, then look in the Function Button column beside the number to find out which button was pressed or released.

The SCP does not use all of the available buttons/ switches.

No buttons can be programmed via the SCP.

Switch

Function Button

1

Power on

2

Power off

5

Function 1 (room) button

6

Function 2 (room) button

7

Function 3 (room) button

8

Function 4 (room) button

9

Input 1 selection button

10

Input 2 selection button

11

Input 3 selection button

12

Input 4 selection button

13

Input 5 selection button

Switch/Function Button table

Switch number locations

The following illustration shows the button/switch memory block numbering on the SCP 150 front panel. Refer to the Switch/Button table, on the previous page. The switch locations are the same on the SCP 150 AAP and SCP 150 L models.

VOLUME

 

PROJECTOR

 

 

Switch

Switch

Switch

 

 

#1

#2

#8

 

IR

Switch

Switch

Switch

 

#5

#6

#7

 

 

Switch Switch Switch Switch Switch

#9

#10

#11

#12

#13

 

 

 

 

SCP 150

3-10 SCP 150 • Remote Communication

SCP 150 • Remote Communication 3-11

Page 16 Page 18
Image 17
Page 16 Page 18
Contents User’s Manual Secondary Control Panels for the System 5 IP SwitcherExtron’s Warranty PrecautionsTable of Contents Ii SCP 150 Table of Contents Table of Contents, cont’dIntroduction SCPFeatures Installation and OperationIntroduction SCPInstallation Overview Installation and OperationInstalling or Replacing Button Labels SCP 150 Installation and OperationInstalling the Electrical Box Installation and Operation, cont’dUL Requirements Preparing the SiteIRCM-DV+ Installation and Operation, cont’d Cabling the Rear PanelMounting in a wall box Mounting the SCPMounting in a rack Mounting on a lecternSCP 150 L Installation and Operation, cont’d Front Panel FeaturesResetting the SCP 150 to factory defaults Resetting to Factory Firmware versionExtron Remote CommunicationUsing Simple Instruction Set SIS Commands Setting Up RS-232 CommunicationUsing the command/response tables Remote CommunicationRemote Communication, cont’d Command/response table for SIS commandsVolume relative function Special Function SIS CommandsCommand Reset to default settings Zap150 Command/response table for special function SIS commandsCommand Ascii Command Response Values Switch number locations Switch Function ButtonRemote Communication, cont’d Updating Firmware AAppendix a Specifications, Part Numbers, Accessories, and DimensionsGeneral Control/remote control padIncluded Parts Panel Dimensions AccessoriesAccessories Part number CablesSCP 150 L SCP 150 Specifications, Parts, Accessories, Dimensions A-7Templates SCP 150 L SCP 150 Specifications, Parts, Accessories, Dimensions A-9

SCP 150L specifications

The Extron Electronics SCP 150L is a versatile and sophisticated control processor designed to streamline AV system management in a variety of environments, including classrooms, conference rooms, and auditoriums. With a focus on ease of use and reliable performance, the SCP 150L represents an integral part of modern AV control solutions.

One of the key features of the SCP 150L is its powerful processing capability. This control processor supports a variety of interfaces and communication protocols, making it easy to integrate with existing AV systems. It is equipped with support for both serial and Ethernet communication, allowing it to control a wide range of devices, including projectors, displays, and audio systems. The SCP 150L can also manage third-party devices, providing users with expanded control options.

Another significant characteristic of the SCP 150L is its user-friendly interface. The device features an intuitive web-based interface, enabling users to configure settings, monitor system status, and execute commands from any device with a web browser. This simplicity in design ensures that users can quickly familiarize themselves with the system, reducing the learning curve associated with more complex control environments.

The SCP 150L is also designed with flexibility in mind. It supports customizable control options, allowing for tailored control schemes that can cater to specific user needs and preferences. This adaptability makes it an ideal choice for environments where AV system requirements may frequently change.

Furthermore, the SCP 150L includes support for Extron’s GlobalViewer Enterprise, which facilitates remote monitoring and management of AV systems. This feature enhances operational efficiency by allowing users to diagnose issues remotely and receive alerts, ultimately minimizing downtime and optimizing system performance.

The compact design of the SCP 150L is another notable characteristic, making it suitable for installation in a variety of settings without occupying excessive space. Its robustness ensures durability, providing users with a reliable solution that can withstand the demands of daily AV operations.

In summary, the Extron SCP 150L is a key component in effective AV system management. Its powerful processing capabilities, user-friendly interface, flexibility, and remote management support make it a standout choice for anyone seeking to enhance the functionality of their AV systems while ensuring maximum ease of use. With the SCP 150L, users can achieve a streamlined and efficient control experience that meets the dynamic needs of modern AV environments.
Top Page Image Contents