DOCSIS 1.0/ 1.1 Equivalent Cable Modem
Chapter 5 USB Installation ( OPTIONAL )
Notice : Some serials of Cable Modem may not have USB port.
Using the USB port to connect to the Internet allows you to install the cable modem more quickly and easily than connecting to the Internet using the Ethernet port, since you do not need to install a network interface card (NIC).
Using USB with the Windows 98 or Windows Me Operating System
To use the USB port with Windows 98/Me:
1.Connect USB cable from PC to Cable Modem
2.Connect RF cable and Power on Cable Modem. Wait until Cable Modem register, it will take from 40 sec to 4 min depends on Network traffic.
3.Cable Modem may reboot if you previously connect it through Ethernet port
4.Windows will prompt new hardware found
5.Insert the Driver
6.Click “Automatic search” then “Next”
7. Windows will locate the driver automatically
8