Cables to Go DOCSIS Cable Modem manual Docsis 1.0/ 1.1 Equivalent Cable Modem

Page 25

DOCSIS 1.0/ 1.1 Equivalent Cable Modem

Using USB with the Windows 2000 or Windows XP Operating System

1. Click Network on Control Panel, make sure USB Cable Modem is installed

NOTE: If you have no TCP/IP protocol, press Add, highlight Protocol and press Add. Then next step is to highlight Microsoft and TCP/IP, and then press OK to complete the adding TCP/IP protocol process.

2.Click TCP/IP -> Conexant USB Cable Modem

3.Click Properties

4.Click the IP Address TAB, choose Obtain an IP address automatically

21

Image 25

Contents User Guide Rev DocsisPage FCC Statement WarrantyTrademarks Docsis 1.0/ 1.1 Equivalent Cable ModemTable of Content About This Manual IntroductionGeneral Description Safety Precautions FeaturesBefore You Begin System Requirement of USB Connection optionalOperation Environment Unpacking and InspectionStep Hardware InstallationOptional Connecting the AC Adapter PowerConnecting the USB Cable USB port Setting Up the Computer to Use an Ethernet Connection Ethernet InstallationUSB Installation Optional Docsis 1.0/ 1.1 Equivalent Cable Modem Docsis 1.0/ 1.1 Equivalent Cable Modem Docsis 1.0/ 1.1 Equivalent Cable Modem LED power-on sequence Name Color Mode StatusCable Modem LED Operation LEDs meanParameter Value Appendix a Cable Modem SpecificationsElectrical Specification Troubleshooting Modem LED Problems Appendix B Questions and AnswersQuestion 1 The Power Light Is Off Answer Question 2 The Cable Light Is Off AnswerQuestion 5 The TX Light Is Off Answer Question 4 The RX Light Is Off AnswerTroubleshooting User Application Problems Troubleshooting Network ProblemsDocsis 1.0/ 1.1 Equivalent Cable Modem Docsis 1.0/ 1.1 Equivalent Cable Modem Docsis 1.0/ 1.1 Equivalent Cable Modem Docsis 1.0/ 1.1 Equivalent Cable Modem Docsis 1.0/ 1.1 Equivalent Cable Modem Page BER Appendix C GlossaryCatv CccmDNS DhcpDocsis ISP IcmpLED MSO McnsNAT Snmp QpskTCP TCP/IP64QAM 10BaseT