Cables to Go 1000TA/TPC user manual Configuring GigaNIX for AppleTalk

Step 5 The installation process is complete. Click on the Restart button to restart your computer.

After installing the software and restarting your computer, you will need to configure AppleTalk and TCP/IP for use with the GigaNIX Gigabit Ethernet adapter. Unless you change your machine’s setup, this procedure will only have to be performed once. After that, your Macintosh will be able to locate and load the adapter driver automatically whenever you reset or power-up your Mac. Refer to the following sections for information on configuring your adapter to utilize AppleTalk and TCP/IP.

3.2Configuring GigaNIX for AppleTalk

Your Macintosh utilizes the AppleTalk protocol to communicate with other Macintoshes running Personal Filesharing. In order for your Gigabit Ethernet adapter to utilize AppleTalk, you must select your adapter in the AppleTalk Control Panel. Additional options may be selected based on the needs of the system, using options documented in the Apple network system administration guides and manuals. Follow the steps below to configure your Gigabit Ethernet adapter for AppleTalk:

Step 1 Pull-down the Apple (apple icon) menu and select the AppleTalk Control Panel item to open a window that should look similar to the one shown below

Asanté FriendlyNET™ GigaNIX™ 1000TA/TPC 13