Gigabyte GA-P31-ES3G Date, Time, IDE Channel 0 Master/Slave, IDE Channel 2, 3 Master/Slave

Page 35

2-3	Standard CMOS Features

		CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
			Standard CMOS Features
	Date (mm:dd:yy)		Wed, Feb 20 2008			Item Help
	Time (hh:mm:ss)		22:31:24		Menu Level`
` IDE Channel 0 Master			[None]
` IDE Channel 0 Slave			[None]
` IDE Channel 2 Master			[None]
` IDE Channel 2 Slave			[None]
` IDE Channel 3 Master			[None]
` IDE Channel 3 Slave			[None]
	Drive A		[1.44M, 3.5"]
	Floppy 3 Mode Support		[Disabled]
	Halt On		[All, But Keyboard]
	Base Memory		640K
	Extended Memory		510M
	Total Memory		512M
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

Date

Sets the system date. The date format is week (read-only), month, date and year . Select the desired field and use the up arrow or down arrow key to set the date.

Time

Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or down arrow key to set the time.

IDE Channel 0 Master/Slave

IDE HDD Auto-Detection

Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.

IDE Channel 0 Master/Slave

Configure your IDE/SATA devices by using one of the three methods below:

•	Auto	Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)
•	None	If no IDE/SATA devices are used, set this item to None so the system will
		skip the detection of the device during the POST for faster system startup.
•	Manual	Allows you to manually enter the specifications of the hard drive when the
		hard drive access mode is set to CHS.
Access Mode		Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.

IDE Channel 2, 3 Master/Slave

IDE Auto-Detection

Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.

Extended IDE Drive

Configure your IDE/SATA devices by using one of the two methods below:

•	Auto	Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)
•	None	If no IDE/SATA devices are used, set this item to None so the system will
		skip the detection of the device during the POST for faster system startup.
Access Mode		Sets the hard drive access mode. Options are: Auto (default), Large.

- 35 -

BIOS Setup

Image 35

Contents GA-P31-ES3G Motherboard Identifying Your Motherboard Revision CopyrightDisclaimer Documentation ClassificationsTable of Contents Drivers Installation Optional Items GA-P31-ES3G Motherboard Layout Block Diagram Installation Precautions Hardware InstallationCPU Product SpecificationsBios Page Installing the CPU Installing the CPU and CPU CoolerCPU Socket Lever Installing the CPU Cooler Dual Channel Memory Configuration Installing the MemoryInstalling a Memory Installing an Expansion Card Back Panel Connectors Mic In Jack Pink Line In Jack BlueLine Out Jack Green Pwrled Internal ConnectorsGND 5 CPUFAN/SYSFAN1/SYSFAN2/PWRFAN Fan Headers FDD Floppy Disk Drive ConnectorSATA20/1/2/3 Sata 3Gb/s Connectors, Controlled by ICH7 IDE IDE ConnectorFaudio Front Panel Audio Header Pwrled System Power LED HeaderFpanel Front Panel Header Spdifo S/PDIF Out Header Cdin CD In ConnectorClrcmos Clearing Cmos Jumper FUSB1/FUSB2 USB HeadersCI Chassis Intrusion Header BatteryGA-P31-ES3G Motherboard Bios Setup Startup Screen Logo Screen DefaultMain Menu Sample Bios Version E4Bios Setup Program Function Keys „ PnP/PCI Configurations „ Standard Cmos Features„ Advanced Bios Features „ Power Management SetupIDE Channel 2, 3 Master/Slave DateTime IDE Channel 0 Master/SlaveMemory Floppy 3 Mode SupportDrive a Halt OnHDD S.M.A.R.T. Capability Hard Disk Boot PriorityFirst/Second/Third Boot Device Password CheckCPU Thermal Monitor 2 TM2 Note Limit Cpuid Max. to 3 NoteNo-Execute Memory Protect Note CPU Enhanced Halt C1ENoteSata Port 0/2 Set to On-Chip Sata ModeOn-Chip Primary PCI IDE Pata IDE Set toUSB 2.0 Controller Smart LAN LAN Cable Diagnostic FunctionSata Port 1/3 Set to USB ControllerOnboard Parallel Port Onboard LAN Boot ROMParallel Port Mode Onboard Serial PortPME Event Wake Up Power On by RingSoft-Off by PWR-BTTN Power On By Keyboard Resume by AlarmHpet Mode Note Power On By MousePnP/PCI Configurations CPU Warning Temperature Reset Case Open StatusCurrent CPU Temperature Current CPU/POWER/SYSTEM FAN Speed RPMCPU Smart FAN Control CPU Frequency Robust Graphics BoosterCPU Clock Ratio Note Fine CPU Clock Ratio NotePCI Express Frequency Mhz FSB1600 CPUCPU Host Clock Control CPU Host Frequency MhzGmch OverVoltage Control DDR2 OverVoltage ControlPCI-E OverVoltage Control FSB OverVoltage ControlLoad Optimized Defaults Load Fail-Safe DefaultsSet Supervisor/User Password Exit Without Saving Save & Exit SetupInstalling Chipset Drivers Drivers InstallationTechnical Manuals Application SoftwareSystem ContactDownload Center System Requirements Xpress Recovery2Before You Begin Installing Windows XP and Partitioning the Hard Drive Installation and ConfigurationPage Using the Backup Function in Xpress Recovery2 Accessing Xpress Recovery2Exiting Xpress Recovery2 Using the Restore Function in Xpress Recovery2Removing the Backup Updating the Bios with the Q-Flash Utility Bios Update UtilitiesUpdating the Bios Page After Updating the Bios Updating the Bios with the @BIOS UtilityUsing @BIOS EasyTune 5 Pro Interface Button Information Table EasyTune 5 ProEasy Energy Saver Easy Energy Saver Interface Meter ModeMeter Mode Button Information Table Stealth Mode Total ModeTotal Mode Button Information Table Configuring Speakers Configuring Audio Input and OutputConfiguring 2/4/5.1/7.1-Channel Audio Front Speaker Out Muting the Back Panel Audio For HD Audio Only Configuring Sound EffectActivating an AC97 Front Panel Audio Module Conneting a S/PDIF out Cable Configuring S/PDIF OutConfiguring S/PDIF out Configuring Microphone Recording Select Realtek HD Audio Input in the Mixer device list Playing the Sound Using the Sound RecorderRecording the Sound Frequently Asked Questions TroubleshootingStart Troubleshooting ProcedureEND Our Commitment to Preserving the Environment Weee Symbol StatementRegulatory Statements Regulatory NoticesChina Restriction of Hazardous Substances Table Appendix GA-P31-ES3G Motherboard B.T. INC USA Mexico Contact UsGigabyte Global Service System