
Chapter 1 Introduction
Features Summary
| Form Factor | — | 20.3cm x 2.9cm Flex ATX size form factor, 4 layers PCB. | 
| Motherboard | — | |
| 
 | 
 | |
| 
 | 
 | 
 | 
| CP U | — | Socket 478 for Intel® Micro  | 
| 
 | — | Support Intel® Pentium® 4 (Northwood, 0.13 m) processor | 
| 
 | — | Intel Pentium®4 400MHz FSB | 
| 
 | — 2nd cache depends on CPU | |
| 
 | 
 | 
 | 
| Chipset | — | Chipset 82845GL HOST/AGP/Controller | 
| 
 | — | ICH4 I /O Controller Hub | 
| 
 | 
 | |
| Memory | — 2  | |
| 
 | — Supports P C1600 DDR or PC2100 DDR SDRAM | |
| 
 | — Supports up to 2GB DRAM (Max) | |
| 
 | — Supports only 2.5V DDR SDRAM | |
| 
 | 
 | 
 | 
| I/O Control | — | ITE8712 | 
| 
 | 
 | 
 | 
| Slots | — | 3 PCI slot supports 33MHz & PCI 2.2 compliant | 
| 
 | 
 | 
 | 
| — | An IDE controller on the Intel ICH4 PCI chipset | |
| 
 | 
 | provides IDE  | 
| 
 | 
 | DMA33/ATA66/ATA100) operation modes. | 
| 
 | — | Can connect up to four IDE devices | 
| 
 | 
 | 
 | 
| — | 1 Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M | |
| 
 | 
 | and 2.88M bytes. | 
| 
 | — 1 Parallel port supports Normal/EPP/ECP mode | |
| 
 | — 1 Serial ports (COMA), 1 VGA port | |
| 
 | — | 4 x USB 2.0/1.1 (2x Rear, 2Front by cable) | 
| 
 | — | 1 Front Audio connector | 
| 
 | — | 1 Serial IRQ connector | 
| 
 | 
 | 
 | 
| — | Built in Intel 845GL Chipset | |
| 
 | 
 | 
 | 
| — | AC97 CO DEC (RealTek A LC201A) | |
| 
 | — | 1 Buzzer | 
| 
 | — | Line In/Line Out/Mic In/CD In/AUX In/Game Port/SPDIF | 
| 
 | 
 | 
 | 
| 
 | 
 | to be continued | 
| - 5 - | Introduction | 
E
n