CFloppy 3 Mode Support (for Japan Area)
8Disabled | Normal Floppy Drive. (Default value) |
8Drive A | Drive A is 3 mode Floppy Drive. |
8Drive B | Drive B is 3 mode Floppy Drive. |
8Both | Drive A & B are 3 m ode Floppy Drives. |
CHalton
The category determines whether the computer will stop if an error is detectedduring power up.
8NO Errors | The system boot will not stop for any error that may be detected |
| and you will be prompted. |
8All Errors | Whenever the BIOS detects a |
8All, But Keyboard | The system boot will not stop for a keyboard error; it will stop for |
| all other errors. (Default value) |
8All, But Diskette | The system boot will not stop for a disk error; it will stop for all |
| other errors. |
8All, But Disk/Key | The system boot will not stop for a keyboard or disk error; it will |
| stop for all other errors. |
E
CMemory
The category is
BaseMemory
The POST of the BIOS will determine the amount of base (or conventional) memory installed inthe system.
The value of the base memory is typically 512 K for systems with 512 K memory installed on the motherboard, or 640 K for systems with 640 K or more memory installed on the motherboard.
ExtendedMemory
The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1 MB in the CPU’s memory address map.
n
- 27 - | BIOS Setup |