Gigabyte GA-8ILFT Install the Central Processing Unit CPU, Socket Actuation Lever Pin1 indicator

Step 1: Install the Central Processing Unit (CPU)

Step 1-1 : CPU Installation

Pin1 indicator	Pin1 indicator
CPU Top V iew	CPU Bott om View
Socket Actuation Lever	Pin1 indicator

E

1.Pull up the CP U socket lever and up to 90-degree angle.

3.Press down the CPU socket lever and finish CPU installation.

2.Locate Pin 1 in the socket and look for a (golden) cut edge on the CPU upper corner. Then insert the CPU into thesocket.

MPlease make sure the CPU type is supported by the motherboard.

MIf you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause improper installation. Please change the insert orientation.

n

- 9 - Hardware Installation Process