D-Sub Port
The
USB 2.0/1.1 Port
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as a USB key- board/mouse, USB printer, USB flash drive and etc.
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following de- scribes the states of the LAN port LEDs.
Connection/ |
|
|
|
| Activity LED | Connection/Speed LED: | ||||||||||
Speed LED |
|
|
|
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| State | Description |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Orange | 1 Gbps data rate |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Green | 100 Mbps data rate |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Off | 10 Mbps data rate |
|
|
|
| LAN Port | ||||||||||||
|
|
|
|
|
| |||||||||||
Activity LED:
State | Description |
Blinking | Data transmission or receiving is occurring |
Off | No data transmission or receiving is occurring |
Line In Jack (Blue)
The default line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out Jack (Front Speaker Out, Green)
The default line out jack. Use this audio jack for a headphone or
Mic In Jack (Pink)
The default Mic in jack. Microphones must be connected to this jack.
To configure
•When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard.
•When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector.
Hardware Installation | - 12 - |