Integrated Peripherals |
|
|
| |||
|
|
|
| |||
|
| CMOS Setup |
| |||
|
|
| Integrated Peripherals |
|
| |
| NV | [All Enabled] |
| Item Help | ||
} | [Press Enter] | Menu Level | ||||
| Onboard Audio Function | [Auto] |
|
|
| |
| [Auto] |
|
|
| ||
| Onboard LAN Boot ROM | [Disabled] |
|
|
| |
| Onboard Serial Port 1 | [3F8/IRQ4] |
|
| ||
| Onboard Parallel Port | [378/IRQ7] |
|
| ||
| Parallel Port Mode | [SPP] |
|
|
| |
x ECP Mode Use DMA | 3 |
|
|
| ||
| USB Controllers |
| [Enabled] |
|
|
|
| USB Legacy Function | [Enabled] |
|
|
| |
| USB Storage Function | [Enabled] |
|
|
| |
: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
|
|
|
|
|
|
|
NV Serial-ATA Controller
Enables or disables the integrated SATA controller(s). You can select whether to enable all SATA control- lers or only the first SATA controller. (Default: All Enabled)
Serial-ATA RAID Config
CMOS Setup
NV SATA RAID function | [Disabled] |
|
| Item Help | |
x NV SATA 1 Primary RAID | Enabled |
| Menu Level | ||
x NV SATA 1 Secondary RAID | Enabled |
|
|
| |
x NV SATA 2 Primary RAID | Enabled |
|
|
| |
x NV SATA 2 Secondary RAID | Enabled |
|
|
| |
: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | |
F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
NV SATA RAID function
Enables or disables RAID for the integrated SATA 3Gb/s controllers. Enabled allows you to configure RAID for individual SATA channel. (Default: Disabled)
NV SATA 1 Primary RAID
Enables or disables RAID for the first channel of the first integrated SATA 3Gb/s controller. This item is configurable only when the NV SATA RAID function item is set to Enabled. (Default: Enabled)
NV SATA 1 Secondary RAID
Enables or disables RAID for the second channel of the first integrated SATA 3Gb/s controller. This item is configurable only when the NV SATA RAID function item is set to Enabled. (Default: Enabled)
NV SATA 2 Primary RAID
Enables or disables RAID for the first channel of the second integrated SATA 3Gb/s controller. This item is configurable only when the NV SATA RAID function item is set to Enabled. (Default: Enabled)
NV SATA 2 Secondary RAID
Enables or disables RAID for the second channel of the second integrated SATA 3Gb/s controller. This item is configurable only when the NV SATA RAID function item is set to Enabled. (Default: Enabled)
- 27 - | BIOS Setup |