Gigabyte GA-M61PME-S2P NV Sata RAID function, NV Sata 1 Primary RAID, NV Sata 1 Secondary RAID

Page 40

NV SATA RAID function

Enables or disables RAID for the integrated SATA 3Gb/s controller. Enabled allows you to configure RAID for individual SATA channel. (Default: Disabled)

NV SATA 1 Primary RAID

Enables or disables RAID for the first channel of the integrated SATA 3Gb/s controller. This item is configurable only if the NV SATA RAID function item is set to Enabled.

(Default: Enabled)

NV SATA 1 Secondary RAID

Enables or disables RAID for the second channel of the integrated SATA 3Gb/s controller. This item is configurable only if the NV SATA RAID function item is set to Enabled.

Onboard Audio Function

Enables or disables the onboard audio function. (Default: Auto)

If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled.

On-Chip MAC Lan

Enables or disables the onboard LAN function. (Default: Auto)

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled.

Onboard LAN Boot ROM

Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled)

Onboard Serial Port 1

Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt. Options are: Auto, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled.

Onboard Parallel Port

Enables or disables the onboard parallel port (LPT) and specifies its base I/O address and corresponding interrupt. Options are: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.

Parallel Port Mode

Selects an operating mode for the onboard parallel (LPT) port. Options are: SPP (Standard Parallel Port)(default), EPP (Enhanced Parallel Port), ECP (Extended Capabilities Port), ECP+EPP.

ECP Mode Use DMA

Selects DMA channel for the LPT port in ECP mode. This item is configurable only if Parallel Port Mode is set to ECP or ECP+EPP mode. Options are: 3 (default), 1.

On-Chip USB

Configures the integrated USB controller.

V1.1+V2.0	Enables the integrated USB 1.1 and USB 2.0 controllers. (Default)
V1.1	Enables only the integrated USB 1.1 controller.
Disabled	Disables the integrated USB 1.1 and USB 2.0 controllers.

Disabled will turn off all of the USB functionalities below.

GA-M61PME-S2P Motherboard

- 40 -

Image 40

Contents GA-M61PME-S2P Motherboard Copyright DisclaimerDocumentation Classifications Identifying Your Motherboard RevisionTable of Contents Drivers Installation Box Contents GA-M61PME-S2P Motherboard Layout Block Diagram Hardware Installation Installation PrecautionsProduct Specifications USBBios Installing the CPU and CPU Cooler Installing the CPUCPU Socket Locking Lever Installing the CPU Cooler Installing the Memory Dual Channel Memory ConfigurationInstalling a Memory Installing an Expansion Card Back Panel Connectors Line Out Jack Green Line In Jack BlueMic In Jack Pink Internal Connectors SATA20 / SATA21GND FDD Floppy Disk Drive Connector CPUFAN/SYSFAN Fan HeadersIDE IDE Connector SATA20/SATA21 Sata 3Gb/s ConnectorsPwrled System Power LED Header BAT BatteryPW Power Switch, Red Fpanel Front Panel HeaderFaudio Front Panel Audio Header Hdasur Surround/Center Audio HeaderCdin CD In Connector Spdifio S/PDIF Out HeaderFUSB1/FUSB2 USB Headers CI Chassis Intrusion HeaderClrcmos Clearing Cmos Jumper GA-M61PME-S2P Motherboard Bios Setup Function Keys DEL Bios Setup F9 Xpress Recovery2F12 Boot Menu Startup ScreenSample Bios Version E8 Bios Setup Program Function KeysMain Menu Main Menu Help Standard Cmos Features  Advanced Bios Features Power Management Setup  PnP/PCI ConfigurationsDate TimeIDE Channel 0 Master/Slave IDE Channel 2/3 MasterFloppy 3 Mode Support Drive aHalt On MemoryHard Disk Boot Priority First/Second/Third Boot DeviceVirtualization Patch AMD TLB Erratum NotePassword Check Away ModeHDD S.M.A.R.T. Capability Init Display FirstIDE Prefetch Mode Serial-ATA RAID ConfigOn-Chip IDE Channel NV Sata ControllerOnboard LAN Boot ROM Parallel Port ModeECP Mode Use DMA NV Sata RAID functionUSB Mouse Support USB Keyboard SupportLegacy USB storage detect PME Event Wake Up Modem Ring OnPower-On by Alarm Hpet Mode NotePower On By Mouse Power On By KeyboardPCI 1 IRQ Assignment PnP/PCI ConfigurationsPCI 2 IRQ Assignment Reset Case Open Status Current System/CPU TemperatureSystem/CPU Warning Temperature Case OpenedCPU Smart FAN Mode Load Fail-Safe Defaults Load Optimized DefaultsSupervisor Password User PasswordSave & Exit Setup Exit Without SavingGA-M61PME-S2P Motherboard Drivers Installation Installing Chipset DriversApplication Software Technical ManualsContact SystemDownload Center Xpress Recovery2 Installation and ConfigurationInstalling Windows Vista and Partitioning the Hard Drive Before You BeginAccessing Xpress Recovery2 Using the Backup Function in Xpress Recovery2Removing the Backup Using the Restore Function in Xpress Recovery2Exiting Xpress Recovery2 Bios Update Utilities Updating the Bios with the Q-Flash UtilityWhat is DualBIOSTM? What is Q-FlashTM?Updating the Bios Page Updating the Bios with the @BIOS Utility Installing and Using @BIOSSave the Current Bios File Update the Bios Using the Internet Update FunctionUpdate the Bios without Using the Internet Update Function Click Update New BiosEasyTune EasyTune 5 Interface Button Information TableGA-M61PME-S2P Motherboard Configuring Sata Hard Drives Configuring the Onboard Sata ControllerTo configure Sata hard drives, follow the steps below Installing Sata hard drives in your computerConfiguring Sata controller mode in Bios Setup Configuring RAID set in RAID Bios AppendixYES Nvidia Required for RAID Mode Making a Sata RAID Driver Diskette for Windows XPAppendix Healthy Manually rebuilding a hard drive Rebuilding an ArrayUnder Storage in the Select a Task pane Configuring 2/4/5.1/7.1-Channel Audio Configuring Audio Input and OutputInstalling the 5.1/7.1 Surround Cable Audio Jacks Configuring SpeakersHigh Definition Audio HD Audio Activating an AC97 Front Panel Audio Module Configuring Sound EffectMuting the Back Panel Audio For HD Audio Only Configuring S/PDIF In/Out Installing the S/PDIF In and Out CablePdif Pdif outConfiguring S/PDIF Configuring S/PDIF In and OutConfiguring S/PDIF Out Configuring Microphone Recording Enabling Stereo Mix Recording Sound Using the Sound RecorderPlaying the Recorded Sound Troubleshooting Frequently Asked QuestionsTroubleshooting Procedure StartEND Weee Symbol Statement Regulatory StatementsRegulatory Notices Our Commitment to Preserving the EnvironmentChina Restriction of Hazardous Substances Table GA-M61PME-S2P Motherboard Contact Us  G.B.T. INC USA Mexico Gigabyte Global Service System