How to Remove the Battery Pack
To remove the battery simply follow the easy steps below.
Locate the 2 battery clips (Shown as 1 & 2) and clip them in opposite directions. Clip 1 will stay locked; clip 2 needs to be held in the open position. Locate the gap (circled) and use it to lift the battery.
Once lifted, pull the battery out of the bay, (Shown as 3) and continue until the battery is completely out of the bay. Ensure to store the units battery in a safe and secure place so that it does not get damaged.
3
2
1
M1405 SERIES USER’S MANUAL
1.3 Connecting the AC Adaptor
Connect the AC adaptor when you need to charge the battery or want to operate using direct power. If the notebook is new and has not been used the battery pack will need to be charged before you can operate from the battery use battery power.
The AC adaptor can be connected to any power source supplying from 100 to 240 volts and 50 or 60 hertz. This allows the AC adaptor to work in most countries and regions.
It is recommended to use only the AC adaptor supplied with the M1405 and any AC adaptor approved by the supplier. Using any other adaptor could cause damage or malfunction and might result in injury.
2
1
3
1.Connect the power cord to the AC adaptor.
2.Connect the AC adaptor to the
3.Connect the power cord to the power outlet.
English
3