6.7 WWAN 3G Connection
The M1405, depending on configuration, features a WWAN 3G Connection. This section will briefly explain how to install and set up the WWAN 3G unit if it did not ship with your M1405.
If you purchased the GIGABYTE WWAN 3G Module separately you should have these items in the package:
1x WWAN 3G Mobile Broadband Card
1x Driver CD
1x Quick Installation Guide
To install the 3.5G Mini Card please follow these steps, however if you are not comfortable doing so, please contact the supplier to install the Module for you. Ensure the M1405 is off before proceeding:
1.Remove the Comm. Bay cover shown above to reveal the Mini Card slots. There should be one open slot available.
2.Line up the 3.5G mini card with the slot, making sure to check the alignment of the notch, and press the card into the slot.
3.There should be an antenna plug available to plug into the mini card to allow for signal reception and transmission - Plug this into the port on the card. Follow the software installation steps on the next page.
4.The SIM card slot is under the battery in the battery bay. Follow the How To Remove Battery guideline to gain access to the slot and then install the SIM card.
M1405 SERIES USER’S MANUAL
4 |
| English |
|
| |
| 1 | 35 |
|
|
2
3