Time
The times format in <hour> <minute> <second>. The time is calculated base on the
IDE Primary Master, Slave / IDE Secondary Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the computer. There are two types: auto type, and manual type. Manual type is
Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category.
If you select User Type, related information will be asked to enter to the following items. Enter the information directly from the keyboard and press <Enter>. Such information should be provided in the documentation form your hard disk vendor or the system manufacturer.
Capacity | The hard disk size. The unit is MegaBytes. |
Access Mode | The options are: Auto / Large / LBA / Normal. |
Cylinder | The cylinder number of hard disk. |
Head | The read /write head number of hard disk. |
Precomp | The cylinder number at which the disk driver changes the write current. |
Landing Zone | The cylinder number that the disk driver heads(read/write) are seated when |
| the disk drive is parked. |
Sectors | The sector number of each track define on the hard disk. |
If a hard disk has not been installed select NONE and press <Enter>.
Drive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the computer.
None | No floppy drive installed |
| |
360K, 5.25" | 5.25 inch | ||
1.2M, 5.25" | 5.25 inch | ||
| (3.5 inch when 3 Mode is Enabled). |
| |
720K, 3.5" | 3.5 | inch | |
1.44M, 3.5" | 3.5 | inch | bytes capacity. |
2.88M, 3.5" | 3.5 | inch | bytes capacity. |
English
- 39 - | BIOS Setup |