English
Creating a RAID 0 Array
To create an RAID 0 array, follow these steps: 1. Press <A> to create array.
SiS RAID BIOS Setting Utility
RAID Setup
Press [A] to creat RAID
Press [D] to delete RAID
[Q] : Exit current menu |
|
|
| |
Location | Model | Capacity | Mode | RAID Type |
Pri_Master | Maxtor 6Y060M0 | 58644MB | UDMA 6 | Single * |
Sec_Master | Maxtor 6Y060M0 | 58644MB | UDMA 6 | Single |
The selected boot disk is marked '*'
2. Press <2> and <Enter> to select RAID 0.
RAID Type : <1> JBOD <2> RAID 0 <3> RAID 1 :
[Q]: Exit current menu
3.Press <1> and <Enter> (Note: We would not suggust your select <2> to create RAID 0 unless you really need it.)
RAID 0
<1> Auto Create <2> Manual Create : 1
[Q] : Exit current menu
| - 90 - |