8)F_AUDIO (Front Audio Panel Connector)
If you want to use Front Audio connector, you must remove
In order to utilize the front audio header, your chassis must have front audio connector. Also please make sure the pin assigment on the cable is the same as the pin assigment on the MB header. To find out if the chassis you are buying support front audio connector, please contact your dealer. Please note, you can have the alternative of using front audio connector or of using rear audio connector to play sound.
|
| Pin No. | Definition | |
|
| 1 | MIC | |
2 | 10 | 2 | GND | |
3 | MIC_BIAS | |||
|
| |||
1 | 9 | 4 | Power | |
5 | Front Audio (R) | |||
|
| |||
|
| 6 | Rear Audio (R)/ Return R | |
|
| 7 | NC | |
|
| 8 | No Pin | |
|
| 9 | Front Audio (L) | |
|
| 10 | Rear Audio (L)/ Return L |
9)PWR_LED (Optional)
PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode.
| Pin No. | Definition |
1 | 1 | MPD+ |
| 2 | MPD- |
| 3 | MPD- |
|
|
|
English
- 25 - | Hardware Installation |