Gigabyte GA-8I845GE775-G Password Check, CPU Hyper-Threading, Limit CPUID Max. to, English

Page 33
Password Check

Password Check

Setup

The system will boot but will not access to Setup page if the correct

 

password is not entered at the prompt. (Default value)

System

The system will not boot and will not access to Setup page if the correct

 

password is not entered at the prompt.

If you want to cancel the setting of password, please just press ENTER to make [SETUP] empty.

CPU Hyper-Threading

This option appears only when the processor you install supports Intel® Hyper-Threading Technology.

Enabled

Enable CPU Hyper-Threading feature. Please note that this feature is only

 

working for operating system with multiprocessors mode supported. (Default

 

value)

Disabled

Disable CPU Hyper-Threading.

Limit CPUID Max. to 3

This option is available only when you install an Intel® Prescott processor (with 533MHz FSB).

Enabled

Limit CPUID Maximum value to 3 when using older OS like NT4.

Disabled

Disable CPUID Limit for Windows XP.(Default value)

No-Execute Memory Protect(Note)

Enabled

Enable No-Execute Memory Protect function.(Default value)

Disabled

Disable No-Execute Memory Protect function.

CPU Enhanced Halt (C1E) (Note)

Enabled

Enable CPU Enhanced Halt (C1E) function.(Default value)

Disabled

Disable CPU Enhanced Halt (C1E) function.

CPU Thermal Monitor 2 (TM2) (Note)

Enabled

Enable CPU Thermal Monitor 2 (TM2) function.(Default value)

Disabled

Disable CPU Thermal Monitor 2 (TM2) function.

CPU EIST Function (Note)

Enabled

Enable CPU EIST function.(Default value)

Disabled

Disable CPU EIST function.

Init Display First

Select the first initiation of the monitor display from onboard/AGP or PCI VGA card.

PCI

Set Init Display First to PCI VGA card.

Onboard/AGP

Set Init Display First to onboard/AGP VGA card.(Default value)

Graphics Aperture Size

This option is available only when you use the onboard VGA function.

128MB

Set Graphics Aperture Size to 128MB. (Default value)

Disabled

Disable this function.

Graphics Share Memory

This option is available only when you use the onboard VGA function.

 

8MB

Set Graphics Share Memory to 8MB. (Default value)

 

1MB

Set Graphics Share Memory to 1MB.

 

(Note) This item will show up when you install a processor that supports this function.

 

 

 

 

 

- 33 -

BIOS Setup

English

Image 33
Contents Users Manual GA-8I845GE775-GIntel Pentium 4 LGA775 Processor Motherboard Rev. 1001 12ME-I845GETG-1001GA-8I845GE775-G April 22 MotherboardMotherboard GA-8I845GE775-GProduct Manual Classification CopyrightTable of Contents Chapter 4 Appendix Chapter 3 Drivers Installation4-1-1 4-1-2GA-8I845GE775-G Motherboard Layout Block Diagram Page 1-1 Considerations Prior to Installation Chapter 1Hardware InstallationInstallation Notices Instances of Non-Warranty1-2 Feature Summary BIOS 1-3-1 Installation of the CPU 1-3 Installation of the CPU and Heatsink1-3-2 Installation of the Heatsink notch DDR memory module 1-4 Installation of Memory1-5 Installation of Expansion Cards 1-6 I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse ConnectorParallel Port Serial Port COMA1-7 Connectors Introduction 1/2 ATX12V / ATX Power Connector 111 2010Pin No 3/4 CPUFAN / SYSFANCooler Fan Power Connector 5 FDD FDD ConnectorSYSFAN 7 CDIN CD In Connector 6 IDE1/2 IDE ConnectorCD-L CD-R8 FPANEL Front Panel Jumper PowerReset Switch IDE Hard Disk Active LED 9 FAUDIO Front Audio Panel Connector 10 SPDIFIO SPDIF In/ OutRear Audio R/ Return R 12 F USB1 Front USB Connector 11 SURCEN Surround Center Connector14 CI Chassis Intrusion, Case Open 13 COMB COMB Connector15 CLRCMOS Clear CMOS 16 BATBatteryGA-8I845GE775-G Motherboard Status Page Setup Menu / Option Page Setup Menu Chapter 2 BIOS SetupCONTROL KEYS Main Menu„ Standard CMOS Features The Main Menu Example BIOS Version F1„ Advanced BIOS Features „ Power Management Setup„ Set User Password „ Set Supervisor Password„ Save & Exit Setup „ Exit Without SavingDate Standard CMOS FeaturesTime IDE Primary Master, Slave /IDE Secondary Master, SlaveFloppy 3 Mode Support for Japan Area Drive A / Drive BHalt on MemoryAdvanced BIOS Features First / Second / Third Boot DeviceBoot Up Floppy Seek CPU Hyper-Threading Password CheckLimit CPUID Max. to No-Execute Memory ProtectNoteOn-Chip Secondary PCI IDE Integrated PeripheralsIDE1 Conductor Cable IDE2 Conductor CableUSB Mouse Support Onboard LAN Boot ROMAC97 Audio Onboard H/W LANPower LED in S1 State Power Management SetupResume by Alarm ACPI Suspend TypePower On By Keyboard Power On By MouseKB Power ON Password AC BACK FunctionPCI1/5 IRQ Assignment PnP/PCI ConfigurationsPCI2 IRQ Assignment PCI3 IRQ AssignmentCase Opened PC Health StatusCurrent VoltageV Vcore / DDR25V / +3.3V / +12V Current CPU TemperatureCPU Clock Ratio Frequency/Voltage ControlCPU Host Clock Control CPU Host Frequency MhzHost/DRAM Clock ratio Top PerformanceMemory Frequency Mhz PCI/AGP Frequency Mhz2-10 Load Optimized Defaults Load Fail-Safe Defaults2-11 Set Supervisor/User Password2-13 Exit Without Saving 2-12 Save & Exit Setup3-1 Install Chipset Drivers Chapter 3Drivers Installation3-3 Software Information 3-2 Software Application3-5 Contact Us 3-4 Hardware InformationThis page lists all device you have for this motherboard Please see the last page for detailsGA-8I845GE775-G Motherboard What is Xpress Recovery ? 4-1-1 Xpress Recovery IntroductionHow to use the Xpress Recovery Chapter 4 AppendixIntel 865PE AGPSet BIOS for 8IPE1000MT F1 Check System Health OK F9 For Xpress Recovery Press B to Backup your System or Esc to Exit 1. Execute Backup Utility2. Execute Restore Utility  This program will recover your system to factory defaultUpdating BIOS with Q-FlashTM Utility on Dual BIOS Motherboards 4-1-2 Flash BIOS Method IntroductionMethod 1 Q-FlashTM Utility Before You BeginTask menu for Dual BIOS utility Exploring the Q-FlashTM / Dual BIOS utility screenEntering the Q-FlashTM utility Task menu for Q-Flash utilitySteps Using the Q-FlashTM utilitydisk stagePlease do not take out the floppy disk when it begins flashing BIOS 3. Press Y button on your keyboard after you are sure to update BIOSBIOS, too The BIOS file becomes Fba after updatingUpdating BIOS with Q-FlashTM Utility on Single-BIOS Motherboards Part TwoPress Y on your keyboard to save and exit Exploring the Q-FlashTM utility screen Copy BIOS completed - Pass Congratulation!! You have updated BIOS successfullyAre you sure to RESET ? at this stage1. Methods and steps Method 2 @BIOSTM Utility2. Note 4-1-3 2- / 4- / 6-/ 8- Channel Audio Function Introduction Stereo Speakers Connection and Settings4 Channel Audio Setup Mic In Center/Subwoofer Speaker Out 6 Channel Audio SetupSurround-Kit connector SPDIF cable connector 8 Channel Audio Setup requires Audio Combo Kit, optional deviceEnglish Note1 SPDIF Output Device Optional DeviceEnable UAJ function UAJ IntroductionYou can click UAJ Automatic button to enable UAJ function 10 beeps CMOS shutdown register read/write error 4-2 TroubleshootingAppendix EnglishGA-8I845GE775-G Motherboard Address No.6, Bau Chiang Road, Hsin-Tien, Taipei 231, Taiwan Contact UsTEL +886-2-8912-4888 G.B.T. INC TEL+1-626-854-9338China