Gigabyte GA-3PXSL-RH user manual IDEHDDAutoDetection, IDE Channel 0~5 Master / Channel 0~1 Slave

BIOS Setup

IDEHDDAutoDetection

Press [Enter] to auto-detect the HDD’s size, head, etc on this channel.

IDE Channel 0~5 Master / Channel 0~1 Slave

The category identifies the types of hard disk from drive C to F that has been installed in the computer. There are two types: auto type, and manual type. Manual type is user-definable; Auto type that will automatically detect HDD type.

Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category.

If you select User Type, related information will be asked to enter to the following items. Enter the information directly from the keyboard and press <Enter>. Such information should be provided in the documentation form your hard disk vendor or the system manufacturer.

Access Mode

This option allows user to set hard drive parameters.

Option: CHS, LBA, Large, Auto (Default Value)

Capacity	Displays the capacity of HDD
Cylinder	Number of cylinders
Heads	Number of heads
Precmp	Write precomp
Landind Zone	Landing zone
Sectors	Number of sectors

If a hard disk has not been installed, select NONE and press <Enter>.

2 9