BIOS Setup
UART Mode Select
Normal | Using as standard serial port. (Default value) |
IrDA Using as IR and set to IrDA mode. | |
ASKIR | Using as IR and set to ASKIR mode. |
SCR Using as Smart Card Interface. | |
UR2DuplexMode
This entry can be adjust when user select [IrDA] in UART Mode item.
Full | IR function Duplex Full. |
Half | IR function Duplex Half. |
Onboard Parallel Port
378/IRQ7 | Enable onboard LPT port and set address to 378/IRQ7. |
| (Default value) |
278/IRQ5 | Enable onboard LPT port and set address to 278/IRQ5. |
3BC/IRQ7 | Enable onboard LPT port and set address to 3BC/IRQ7. |
Disabled | Disable onboard LPT port. |
Parallel Port Mode
3BC/IRQ7 | Enable onboard LPT port and set address to 3BC/IRQ7. |
Disabled | Disable onboard LPT port. |
SPP | Using Parallel port as Standard Parallel Port. (Default value) |
EPP | Using Parallel port as Enhanced Parallel Port. |
ECP | Using Parallel port as Extended Capabilities Port. |
ECP+EPP | Using Parallel port as ECP & EPP mode. |
Normal | Using Parallel port as Normal. |
ECPModeUseDMA
This option is only available if the setting for the Parallel Port Mode option is ECP. This option sets the DMA channel used by parallel port.
The options: 1, 3 (Default value)
4 5