2nd LAN Controller
Auto | Auto detect onboard second H/W LAN. (Default value) |
Disabled | Disable this function. |
IDE HDD Block Mode
The IDE HDD Block Mode feature speeds up hard disk access by transferring data from multiple sectors at once instead of using the old single sector transfer mode. When you enable it, the BIOS will automatically detect if your hard disk supports block transfers and configure the proper block transfer settings for it. Up to 64KB of data can be transferred per interrupt with IDE HDD Block Mode enabled.
Enabled | Enable IDE HDD Block Mode. (Default value) |
Disabled | Disable this function. |
Onboard FDC Controller
Enabled | Select “enabled” to active Onboard Floppy Controller. (Default value) |
Disabled | Disable this function. |
Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 | Enable onboard Serial port 1 and set IO address to 3F8. (Default value) |
2F8/IRQ3 | Enable onboard Serial port 1 and set IO address to 2F8. |
3E8/IRQ4 | Enable onboard Serial port 1 and set IO address to 3E8. |
2E8/IRQ3 | Enable onboard Serial port 1 and set IO address to 2E8. |
Disabled | Disable onboard Serial port 1. |
Onboard Serial Port 2
Auto BIOS will automatically setup the port 2 address.
3F8/IRQ4 | Enable onboard Serial port 2 and set IO address to 3F8. |
2F8/IRQ3 | Enable onboard Serial port 2 and set IO address to 2F8. (Default value) |
3E8/IRQ4 | Enable onboard Serial port 2 and set IO address to 3E8. |
2E8/IRQ3 | Enable onboard Serial port 2 and set IO address to 2E8. |
Disabled | Disable onboard Serial port 2. |
4 4