Cisco Systems OL-3560-02 Shield ground TxD/RxD+, RxD/TxD+, TxD/RxD RxD/TxD TxC/RxC+, TxCE/TxC+

Chapter 1 Overview

Cables, Connectors, and Pinouts

Table 1-4 EIA/TIA-449 Adapter Cable Signals

DTE Cable (CAB-449MT=)						DCE Cable (CAB-449C=)
VIP End, HD1					Network End,	VIP End, HD					Network End,
60-Position Plug					DB-37 Plug	60-Position Plug					DB-37 Receptacle
Signal	Pin			Pin	Signal	Signal	Pin			Pin	Signal
Shield ground	46			1	Shield ground	Shield ground	46			1	Shield ground
TxD/RxD+	11	—>	4		SD+	RxD/TxD+	28	<—	4	SD+
TxD/RxD–	12	—>		22	SD–	RxD/TxD–	27		<—	22	SD–
TxC/RxC+	24	<—	5		ST+	TxCE/TxC+	13	—>	5	ST+
TxC/RxC–	23	<—		23	ST–	TxCE/TxC–	14		—>	23	ST–
RxD/TxD+	28	<—	6		RD+	TxD/RxD+	11	—>	6	RD+
RxD/TxD–	27	<—		24	RD–	TxD/RxD–	12		—>	24	RD–
RTS/CTS+	9	—>	7		RS+	CTS/RTS+	1	<—	7	RS+
RTS/CTS–	10	—>		25	RS–	CTS/RTS–	2		<—	25	RS–
RxC/TxCE+	26	<—	8		RT+	TxC/RxC+	24	—>	8	RT+
RxC/TxCE–	25	<—		26	RT–	TxC/RxC–	23		—>	26	RT–
CTS/RTS+	1	<—	9		CS+	RTS/CTS+	9	—>	9	CS+
CTS/RTS–	2	<—		27	CS–	RTS/CTS–	10		—>	27	CS–
LL/DCD	44	—>	10		LL	NIL/LL	29	—>	10	LL
Circuit ground	45		37		SC	Circuit ground	30			37	SC
DSR/DTR+	3	<—	11		ON+	DTR/DSR+	7	—>	11	ON+
DSR/DTR–	4	<—	29		ON–	DTR/DSR–	8		—>	29	ON–
DTR/DSR+	7	—>	12		TR+	DSR/DTR+	3	<—	12	TR+
DTR/DSR–	8	—>	30		TR–	DSR/DTR–	4		<—	30	TR–
DCD/DCD+	5	<—	13		RR+	DCD/DCD+	5	—>	13	RR+
DCD/DCD–	6	<—	31		RR–	DCD/DCD–	6		—>	31	RR–
TxCE/TxC+	13	—>	17		TT+	RxC/TxCE+	26	<—	17	TT+
TxCE/TxC–	14	—>	35		TT–	RxC/TxCE–	25		<—	35	TT–
Circuit ground	15		19		SG	Circuit ground	15			19	SG
Circuit ground	16		20		RC	Circuit ground	16			20	RC
Mode 1	49				Shorting group	Mode 1	49				Shorting group
Ground	48					Ground	48
Ground	51				Shorting group
Mode_DCE	52

1. HD = high density.

PA-4T Synchronous Serial Port Adapter Installation and Configuration

1-10 OL-3560-02