Cisco Systems OL-3560-02 manual Identifying Interface Addresses

Page 15

Chapter 1 Overview

Identifying Interface Addresses

Figure 1-11 Interface Slot Numbers—Cisco 7505 Shown

VIP in interface processor slot 3

 

EJECT

SLOT

1

 

CPU

HALT

RESET

NORMAL

 

0

 

 

SLOT

 

 

 

 

ROUTE SWITCH PROCESSOR

CONSOLE

 

 

Slot 3

Interface

 

 

 

 

Slot 2

 

 

Slot 1

processor

 

 

slots

 

 

 

 

Slot 0

 

29619

 

 

 

Identifying Interface Addresses

This section describes how to identify interface addresses for the PA-4T in supported platforms. Interface addresses specify the actual physical location of each interface on a router or switch.

Interfaces on the PA-4T installed in a router maintain the same address regardless of whether other port adapters are installed or removed. However, when you move a port adapter to a different slot, the first number in the interface address changes to reflect the new port adapter slot number.

Interfaces on a PA-4T installed in a VIP maintain the same address regardless of whether other interface processors are installed or removed. However, when you move a VIP to a different slot, the interface processor slot number changes to reflect the new interface processor slot.

Note Interface ports are numbered from left to right starting with 0.

Table 1-8explains how to identify interface addresses.

Table 1-8

Identifying Interface Addresses

 

 

 

 

 

 

 

Platform

 

Interface Address Format

Numbers

Syntax

 

 

 

 

Cisco 7200 series routers

Port-adapter-slot-number/interface-port-number

Port adapter slot—0 through 6

1/0

 

 

 

(depends on the number of slots

 

 

 

 

in the router)1

 

 

 

 

Interface port—0 through 3

 

 

 

 

 

VIP in Cisco 7500 series

Interface-processor-slot-number/

Interface processor slot—0

3/1/0

routers

 

port-adapter-slot-number/interface-port-number

through 12 (depends on the

 

 

 

 

number of slots in the router)

 

 

 

 

Port adapter slot—always 0 or 1

 

 

 

 

Interface port—0 through 3

 

 

 

 

 

 

1. Port adapter slot 0 is reserved for the Fast Ethernet port on the I/O controller (if present).

PA-4T Synchronous Serial Port Adapter Installation and Configuration

 

OL-3560-02

1-15

 

 

 

Image 15
Contents Port Adapter Overview OverviewSynchronous Serial Overview Distances Synchronous Serial SpecificationsLEDs EIA/TIA-232 EIA/TIA-449, X.21, V.35, EIA-530Cables, Connectors, and Pinouts PA-4T Port Adapter Receptacles and CablesLED Label Function Color and Function Overview Cables, Connectors, and Pinouts EIA/TIA-232 Connections EIA/TIA-449 Connections EIA-530 Connections 4T Port Adapter Cable PinoutsTxC/NIL TxCE/TxC RxC/TxCE NIL/RxC TxCE/TxC RxC/TxCE Mode Ground Shorting group ModeDCEShield ground TxD/RxD RxD/TxD Circuit groundTxCE/TxC+ Shield ground TxD/RxD+RxD/TxD+ TxD/RxD RxD/TxD TxC/RxC+TxCE/TxC+ TxCE+ Mode1 Ground Shorting group Mode2 ModeDCE VIP End, HD Network End Position Plug DB-25 PlugShield ground TxD/RxD+ TxD+ RxD/TxD+ RxC TxC/RxC+ TxC+ RxC/TxCE+RxD/TxD TxD/RxD TxCE/TxC+ Mode Shorting group Ground ModeDCE TxC/NIL RxC/TxCE RxC/TxDShield ground Frame ground Circuit ground TxD/RxD RxD/TxD RxD/TxD+Cisco 7200 Series Router Slot Numbering Port Adapter Slot Locations on the Supported PlatformsInterface processor slots are numbered as shown in Figure VIP Slot NumberingPlatform Interface Address Format Numbers Syntax Identifying Interface AddressesVIP Interface Addresses Cisco 7200 Series Routers Interface Addresses