Extron electronic DVI-RGB 150 Installation and Operation, Installation Overview, Rack mounting

Page 7

Installation and Operation

Installation Overview

To install and set up an Extron DVI-RGB 150 for operation, follow these steps:

1Turn off all of the equipment. Ensure that the video sources and the output display are all turned off and disconnected from the power source.

2Mount the interface. See Mounting the Interface, below.

3Connect the cables. See Rear Panel Connections and Controls in this chapter.

4Plug in the power supply, then turn on the display devices and the input devices.

5Set the level and peaking. See Front Panel Controls and Indicator, on page 2-8.

Mounting the Interface

CInstallation and service must be performed by authorized personnel only.

The 1" high, quarter-rack width interface can be placed on a tabletop, mounted on a rack shelf, mounted under a desk or tabletop, or mounted through a desk.

Tabletop placement

Affix the four included rubber feet to the bottom of the unit and place it in any convenient location.

Rack mounting

6" Deep Rack Shelf

1/2 Rack Width Front False

Faceplate

Front false faceplate uses 2 screws.

(2) 4-40 x 3/16" Screws

Use 2 mounting holes on opposite corners.

Figure 2-1 — Mounting the unit on a 6-inch rack shelf

1U Universal Rack Shelf

1/2 Rack Width Front False

Faceplate

For optional rack mounting, mount the interface on any of the following rack shelves:

•RSU 126 6" 1U deep universal rack shelf kit (part #60-190- 10) (figure 2-1)

•RSB 126 6" 1U deep basic rack shelf (part #60-604-10)

•RSU 129 9" 1U universal rack shelf kit (part #60-190-01) (figure 2-2)

•RSB 129 9" 1U basic rack shelf (part #60-604-01)

The interface can be mounted in the front or the rear of the full-size (non-6") rack shelves.

1. If installed, remove the feet from the bottom of the unit.

Front false faceplate uses 2 screws.

Use 2 mounting holes on opposite corners.

(2) 4-40 x 3/16" Screws

NOTE: Using screws longer than 3/16” will damage the unit and void the warranty.

2.

Mount the interface using two 4-40 x 3/16" screws in

 

opposite (diagonal) corners to secure the unit to the shelf.

3.

Install false faceplate(s) or other unit(s) to the rack shelf.

Figure 2-2 — Mounting the unit on a standard rack shelf

2-2

DVI-RGB 150 • Installation and Operation

DVI-RGB 150 • Installation and Operation

2-3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents DVI to Analog RGB Video Interface DVI-RGBExtron’s Warranty PrecautionsFCC Class a Notice Page Appendix a Reference Information Chapter Two Installation and OperationDVI-RGB Table of Contents, contdOne IntroductionChapter Two Installation and OperationIntroduction Mounting the Interface Installation and OperationInstallation Overview Tabletop placementUnder-desk mounting Installation and Operation, cont’dThrough-desk mounting Rear Panel Connections and Controls Output Resolution rotary switch If the DDC SourceDVI-RGB 150 front panel OperationReference Information AAppendix aSpecifications Reference InformationPart Numbers Reference Information, cont’dReference Information
Related manuals
Manual 2 pages 45.8 Kb

DVI-RGB 150 specifications

Extron Electronics has long been recognized for its commitment to providing high-quality audiovisual solutions, and the DVI-RGB 150 is no exception. This versatile device is designed for the conversion of DVI signals to RGB or analog video formats, making it an essential tool for any professional AV setup.

One of the main features of the DVI-RGB 150 is its ability to support various resolutions, including standard and high-definition formats. This flexibility ensures that users can seamlessly integrate it into existing systems without compromising video quality. The device supports resolutions up to 1920x1200 at 60 Hz, making it suitable for a wide range of applications, from educational settings to corporate environments.

Another noteworthy characteristic of the DVI-RGB 150 is its advanced signal processing technology. The device employs high-performance digital conversion circuitry, which guarantees exceptional image quality. This technology minimizes signal degradation and offers low latency during the conversion process, ensuring smooth and reliable performance for demanding applications.

The DVI-RGB 150 features a user-friendly design with a comprehensive set of input and output connectors. It includes a DVI input, RGBHV outputs, and sync outputs, allowing for straightforward integration with various display devices, such as projectors, monitors, and other video equipment. Additionally, it comes with a compact form factor, making it easy to install and manage in any rack or AV setup.

One of the key advantages of the DVI-RGB 150 is its extensive compatibility with various video standards. The device is capable of accepting DVI as well as analog video signals. This versatility makes it an ideal choice for users who require a reliable converter to bridge the gap between digital sources and older analog display technologies.

In terms of functionality, the DVI-RGB 150 also incorporates features such as automatic input detection and customizable output settings, giving users the control they need to optimize their video output for various environments. Coupled with its exceptional build quality and reliability, the DVI-RGB 150 stands out as an essential tool for any modern AV installation.

With its robust performance, user-friendly design, and advanced conversion capabilities, the Extron DVI-RGB 150 is an excellent choice for professionals seeking to enhance their audiovisual setups. Whether for a classroom, conference room, or any application requiring efficient video signal conversion, the DVI-RGB 150 provides a reliable solution that meets the demands of today's technology-driven environments.
Top Page Image Contents