BenQ AWL-500 user manual EAP Authenticate Parameter

Page 20

MAC Authenticate Parameter

Wireless Interface– Enable RADIUS authentication through MAC address of Wireless LAN card. LAN Interface– Enable RADIUS authentication through MAC address of Ethernet LAN card.

EAP Authenticate Parameter

Wireless Interface– Enable EAP-MD5 certification for wireless interface.

Radius Parameters

Radius IP – A specify IP address of the remote RADIUS server.

Radius Port – For auth-port port-number, specify the UDP destination port for authentication requests.

Radius Secret Key– For key string, specify the authentication and encryption key used between the Authenticator and the RADIUS daemon running on the RADIUS server. The key is a text string that must match the encryption key used on the RADIUS server.

Radius NAS ID – The RADIUS Client authenticate name.

-16-	BENQ Corporation

Image 20

Contents Wireless LAN Access Point AWL-500 Version JuneCopyright Statement TrademarksFCC Warning Table of Contents Introduction Product Kit System RequirementsTop panel of the Access Point Mechanical Description10/100Mbps Ethernet Ports Back panel of the Access PointPower Socket Connect the Ethernet Cable Hardware InstallationPlug the Power Cable Configuring the Access Point Using the Access Point Search ToolDescription Change IP Address Using the Web Management Quick Installation Wizard Information StatisticsAssociated Table Advanced Setting Security SetupAccess Control 802.1x Security setup EAP Authenticate Parameter User Account Radius Accounting ParametersBenq Corporation Save Setting Reboot SystemFirmware Upgrade Web LanguageLoad Default Setting