Hardware Installation, Connect the Ethernet Cable

2-4 Hardware Installation

Connect the Ethernet Cable

The 11Mbps Wireless LAN Access Point supports 10/100M Ethernet connection. Attach your UTP Ethernet cable to the RJ-45 connector on the Access Point. Then connect the other end of the RJ-45 cable to a hub or a station. Please be sure to use the MDI port to connect the Access Point to a hub. Otherwise, please use the MDI-X port to connect the Access Point to a computer/station.

Plug the Power Cable

Plug the power adapter to the power socket on the Access Point, and plug the other end of the power into an electrical outlet.

NOTE

ONLY use the power adapter supplied with the Access Point.

Otherwise, the product may be damaged.

-5-	BENQ Corporation