3 Install hardware
After installing drivers, install the ATTO ExpressSAS adapter into a PCI Express expansion slot on your computer.
CAUTION
Back up your system data before changing or installing any hardware.
System requirements
The ATTO ExpressSAS host adapter package contains the host adapter, the ATTO Utilities CD and a warranty and registration card. If any of these items are missing, contact your ATTO authorized sales representative.
To install and use the ATTO ExpressSAS host adapter you need
•A computer with an available PCI Express expansion slot.
•The complete ATTO ExpressSAS host adapter package.
SAS address
Each ATTO ExpressSAS adapter has a unique SAS address designated by the Institute of Electrical and Electronic Engineers which allows the system to recognize the ATTO ExpressSAS host adapter as a unique part of your configuration.
The address is clearly marked on the back of the board for easy identification. Please keep a reference copy of the number in a safe place.
Installation
WARNING
ATTO ExpressSAS host adapters contain components that are sensitive to electrostatic discharge (ESD). ESD can cause damage to the ATTO ExpressSAS host adapter. Please follow standard methods to avoid ESD.
1Install system drivers before you begin hardware installation. Refer to Install drivers on page 3.
2Power down the computer and unplug the computer from all power sources.
3Open the case.
4Insert the ATTO ExpressSAS host adapter into any open PCI Express expansion slot. If you have questions about how to install an expansion card in your system, consult your computer’s documentation.
5Close the case on the computer and power it up.
6Installed drivers are loaded.
For Windows XP and Server 2003
•Windows detects your ExpressSAS Adapter and the Found New Hardware wizard appears. Proceed through the wizard with the default settings for each adapter channel. Insert the ExpressSAS installation disk when prompted.
•Windows XP only: After adapter installation is complete, the Found New Hardware wizard shows an ATTO Phantom Device for each channel. Proceed through the wizard with default settings to complete the installation.
For Windows Vista
•Windows Vista detects your adapter and automatically installs the required drivers.
If drivers do not load, refer to Install drivers on page 3 and Troubleshooting on page 11.
7Connect SAS devices: insert SAS cable from each device to a connector on the ATTO ExpressSAS host adapter until you hear a click.
Use the ATTO Configuration Tool to configure RAID groups. Refer to the ATTO Utilities Installation and Operation Manual for complete information.
5 ATTO Technology Inc. ATTO ExpressSAS Host Adapter Installation and Operation Manual