ATTO Technology FC-44ES, FC-42ES, FC-41ES, FC-41EL, FC-42XS, FC-41XS, FC-21PS operation manual

Page 7

Celerity FC-41EL Adapter

The Celerity FC-41EL is a single-channel host adapter. With 4-Gb FC speeds of up to 800 MB/sec., the FC-41EL supports the most demanding application requirements.

The FC-41EL takes advantage of the latest in host interconnect technology, PCI Express, a serial, high- speed connection that supports aggregate throughout up to 2 GB/sec.full-duplex. The FC-41EL is software compatible with existing PCI and PCI-X products using the same device drivers as other Celerity FC family products, simplifying user installation and support. It is backward compatible with existing 2-Gb and 1-Gb FC infrastructures, protecting existing technology investments.

Hardware specifications

1 Fibre Channel port

4-Gigabit data transfer rate

800 MB/sec. maximum full-duplex throughput

Supports all FC topologies: direct fabric, arbitrated loop and point-to-point

ANSI Fibre Channel: FC-PH, FC-FCP, FC-AL, FC-AL2, FC-PLDA, FC-FLA

Flash ROM for easy field upgrades

FC Class 3 support

Local management and diagnostics

Buffer credits: 4

Advanced FC capabilities

Supports SNIA HBA API

On-demand automatic negotiation between 4- Gb, 2-Gb and 1-Gb Fibre Channel

Supports initiator and target modes

Supports Windows® FDMI and WMI

Supports exclusive ATTO Advanced Data Streaming (ADS™) technology

Host bus specifications

x4 mechanical and x4 electrical PCIExpress interconnect

Conforms to PCI Express Base Spec 1.0a

Conforms to PCI Express CEM Spec 1.0a

Environmental & physical specifications

Conforms to PCIe low profile form factor specifications

Operating temperature: 0 to 45º C (32-113º F)

Storage temperature: -40 to 70ºC (-40 to 158º F)

Relative humidity: 10 to 90% non-condensing

100 lf/m (minimum) airflow recommended

Conforms to PCI Express low-profile form-factor specification

12V @ 0.5A (max)

Length: 5.600 inches

Height: 2.712 inches

RoHS compliant

External connectivity

Easy-to-install full and low-profile connection plates

External LEDs for on-line and speed status

A pluggable optical LC SFP transceiver included

Software specifications

Windows XP, 2000, Server 2003 and Vista

Mac OS X (10.4.x, 10.5.x)

4

Image 7
Contents Atto Celerity Fibre Channel Host Adapters Atto Technology, Inc Contents Celerity FC-44ES Adapter Atto provides Fibre Channel solutionsCelerity FC-42ES Adapter Celerity FC-41ES Adapter Celerity FC-41EL Adapter Celerity FC-42XS Adapter PCI bus specificationsCelerity FC-41XS Adapter Celerity FC-21PS Adapter Celerity selection guide Glossary Fibre Channel is a key technology for storageTerm Definition LED Specialized configurations Installing and updating driversWindows 2000/XP/Server 2003/Vista Upgrading an existing Celerity FC driver Adding a Celerity FC adapter to an existing installationCreating a boot disk Click on Install DriverCreating a floppy disk from a download Mac OS X driver installation, updateLinux driver installation, update Creating a Celerity FC installation floppyPage Fibre Channel address Hardware installationInstallation System requirementsBracket details Page Adapter board details Exhibit 4-10 FC-41ES Exhibit 4-12 FC-42XS Exhibit 4-13 FC-41XS Exhibit 4-14 FC-21PS Updating flash on a PC Launch the Configuration ToolUpdating hardware flash Updating flash in all operating systemsMac OS TroubleshootingGeneral suggestions Select Properties LinuxSelect Device Manager European standards Appendix a Standards and compliancesFCC standards radio and television interference Canadian standardsFollowing apply to the Celerity FC-42XS host adapter only Appendix B Accessories Appendix C Scsi adapter selection guide Ultra 320 Scsi Product Features12.5 Appendix D SAS adapter selection guide Product Features Atto ExpressSAS RAID Adapters R348 R380Operation Appendix E Safety, warranty, contactsSafety Atto Technology, Inc. limited warranty