34CHAPTER 4: RUNNING THE SETUP WIZARD
PPPoE Mode
Figure 17 PPPoE Screen
To setup the gateway for use with a PPP over Ethernet (PPPoE) connection, use the following procedure:
1Enter your PPP over Ethernet user name in the PPPoE User Name text box.
2Enter your PPP over Ethernet password in the PPPoE Password text box.
3Enter your PPP over Ethernet service name in the PPPoE Service Name text box.
This is optional. Not all ISPs require a PPPoE service name.
Do not enter anything in this box if your ISP does not require a service name.
4Check all of your settings, and then click Next. Refer to “LAN Settings” on page 38 for more information.