Audiovox VOH1012 S, VOH1012P manual Materials Included in this Package, Tools Required

Page 3

MATERIALS INCLUDED IN THIS PACKAGE:

1)VOH1012 TV/Video Monitor (1pc)

2)12 Pin Power / Signal harness (P/N 112-3483) (1 pc)

3)2 Pin Power Wire Harness with choke (P/ N 112B3143) (1 pc)

4)Hardware Package

#4 x 3/8” Screws (11 pcs)

#8 x 5/8” Self Drilling Screws (4 pcs) #8 Washers (4 pcs)

5)Remote Control (136-3855) (1pc)

6)PODTVT TV Tuner (P/N 136-3877) (1pc) (Optional)

7)SIRSWB Relay Box (P/N 112C3159) (1pc) (Optional)-See important note on previous page

8)Trim Ring (1pc)

9)FM Antenna Wire (1pc)

10)A/V Adapter Cable (P/N 112B3227) (1pc)

11)Accessory Harness (P/N 8010730 (1pc)

TOOLS REQUIRED:

#2 Phillips Screwdriver

#1 Phillips Screwdriver

Utility or Razor Knife or Shears Wire Strippers

Upholstery hook tool (for removal of panels as necessary) Electrical Tape

Masking Tape

Multimeter (to verify 12 volt DC and continuity: Do not use a test light or logic probe) Marker pen – to mark headliner

Scribe (to mark trim ring if used)

Misc. electrical connectors (to connect to vehicle power source). Requirements will vary from vehicle to vehicle)

DVD Movie (to verify system operation after installation)

-1-

Image 3
Contents Installation Guide Important Notice Tools Required Materials Included in this PackageGeneral System Configurations General Installation ApproachVehicle Preparation Mini Console Installation Mounting the MINI-CONSOLE VOH1012 Positive Switched Dome lighting Connecting the Dome LightsTroubleshooting 128-7289