Mini Console Installation | Audiovox ADV350S, ADV350P, ADV350B

MINI CONSOLE INSTALLATION:

This page only covers special installation considerations for the mini-console installation. If the video monitor is to be installed in a vehicle with the mini console, this console may need to be trimmed to fit the contour of the vehicle headliner.

1)In this installation, the video monitor is mounted directly to the overhead cross-member in the roof using the mounting screw bosses. These screw bosses should contact the cross-member di- rectly (i.e.: no gap between the screw boss and the roof structure). Also, be sure that the screws do not pierce the outer roof skin when fully fastened to the cross-member. The mini-console is attached to the video monitor using the perimeter screw bosses. It is important that the screws used in this installation are not overtightened, and that the video monitor and mini-console are mounted in such a way that the assembly does not distort (or bend) when the mounting screws are tightened. An alternate method is to use a piece of plywood (12"x9"x3/4"). First secure the plywood block to the cross-member, then screw the monitor into the plywood. See the drawing on page 5.

2)It is best to mount the video monitor to the roof structure without the mini-console first. There should be a gap between the headliner and the outer flange of the video monitor. The mini-console should be cut to full this gap. Apply masking tape to the outer surface of the mini-console in the areas where the cut will be made.

3)Mark the cut to follow the necessary contour of the roof. The suggested method of marking is as follows:

A)First mark the narrowest point of the mini-console on the masking tape. Be careful to consider not only vertical location, but fore-aft location.

B)Using the handle of a screwdriver, make a “transfer marking tool”. See diagram below. Place the tool against the roof and the marker against the masking tape on the mini-console. Trace the cut to be made around the entire perimeter of the mini- console.

C)Cut the mini-console using a sharp utility knife or shears. Make the cut in several passes over the marked line, each time cutting a little deeper. It is not necessary to cut completely through the plastic, the cut only need be over 50% of the wall thick- ness of the plastic. By bending the cut back and forth several times, the plastic will break cleanly at the cut.

D)Check the fit of the trimmed console and make any minor adjustments necessary.

4)The mini-console can be painted or covered with a material that matches the headliner before assembling the mini-console to video monitor.

5)The finished mini-console should be attached to the video monitor, then attach the assembly to the roof.

Headliner

CutLineline

LowestPoint pointMark mark

Figure 6

Refer to Fig 7 for detail on attaching

Tapemarkermarkerto screwdriverto startingscrewdriverat. Startingco soleatto videoyourpodmarknd video pod to

your mark for the lowest point, then

tracefor thecontlowestur of the roofpoint, trace the contour of the roof

vehicle structure.

-4-

ADV350B, ADV350S, ADV350P specifications

The Audiovox ADV350P, ADV350S, and ADV350B are innovative sound solutions designed to enhance audio experiences for home entertainment systems. Each model brings a distinct set of features and characteristics, making them suitable for various audio needs.

The ADV350P model is known for its powerful performance and advanced functionalities. It incorporates cutting-edge Bluetooth technology, allowing users to effortlessly connect their smartphones or tablets for seamless audio streaming. The device also features a built-in microphone, facilitating hands-free calls, making it an ideal companion for busy lifestyles. With its sleek design, the ADV350P fits comfortably in any modern living space, and its portability ensures that music lovers can enjoy high-quality sound on the go.

The ADV350S model elevates the audio experience further with enhanced sound quality and an array of sound optimization technologies. Featuring dual speakers, this model provides rich and immersive sound, utilizing advanced audio processing algorithms to deliver clarity across different frequencies. The ADV350S also includes customizable sound settings, enabling users to adjust treble and bass levels according to personal preference. Additionally, with its long-lasting battery life, users can enjoy uninterrupted listening for hours, whether at home or on outdoor adventures.

For those seeking a budget-friendly option without compromising on quality, the ADV350B model stands out. This model is equipped with essential features such as Bluetooth connectivity and a robust integrated speaker system, making it a great choice for casual listeners. Its user-friendly interface ensures that even the least tech-savvy individuals can easily navigate its functionalities. The ADV350B also emphasizes durability with a rugged design, making it suitable for various environments, whether indoors or outdoors.

All three models boast a modern aesthetic, making them not just functional devices but also stylish additions to any room. With their strong performance, flexible connectivity options, and user-friendly designs, the Audiovox ADV350P, ADV350S, and ADV350B cater to a wide range of audio needs, ensuring that users can enjoy their favorite music with exceptional sound quality. Whether you're hosting a gathering, on a road trip, or simply unwinding at home, these advanced audio solutions from Audiovox deliver impressive audio experiences tailored to your lifestyle preferences.