Apple 150B How to Use the On Screen Display OSD, Color Temperature window, Smart Help, PRESETS is

Page 15
When done with red, press the

How to Use the On Screen Display (OSD)

Color Temperature window

If you need to adjust any of the two preset options (DTP or CAD/CAM), follow the steps below to modify the colors that appear on your screen. You can make individual adjustments to each of the preset options.

1Press the OSD button.

Turn the ROTARY knob until the COLOR window is highlighted. Next, press the OSD button. Then, turn the ROTARY knob until USER PRESETS icon is highlighted.

E N

8You will now be back at the EXIT window. See SMART HELP below for options.

7To exit USER PRESET 1 , press the OSD button. Next, turn the ROTARY knob until the EXIT box is highlighted.

Then, press the ON SCREEN DISPLAY button.

65

When done with green, press

When done with red, press the

OSD button. GREEN will be

the OSD button. BLUE will be

highlighted. Then, turn the

highlighted. Then, turn the

ROTARY knob to increase or

ROTARY knob to increase or

decrease the green.

decrease the blue.

 

4

3

If necessary,

 

 

turn the ROTARY

 

knob until

 

of the USER

 

PRESETS is

 

highlighted.

 

Next, press the

 

ON SCREEN

 

DISPLAY button.

First, RED will be highlighted.

Next, to adjust the red, press the OSD button again. Then, turn the ROTARY knob to increase or decrease the red.

Smart Help

After returning to Exit . . .

. . . to continue to User Preset 2, repeat steps 3 through 7, selecting USER PRESET 2.

. . . to continue to Special Controls window, turn the ROTARY knob until SPECIALCONTROL WINDOW is highlighted. Next, press the ON SCREEN DISPLAY button. Now, follow steps 2 - 5 under SPECIAL CONTROLS on the next page.

. . .to exit the On Screen Display completely, press the OSD button and choose either SAVE or NO SAVE in setting mode, then push OSD button to exit OSD. (See page 18 for other exit options.)

15

Image 15
Contents Dansk Table of ContentsEnglish FrançaisIntroduction Introduction and SafetyFeatures Safety precautions and maintenanceCorrect handling of the monitor Installation Locations & AccessoriesInstallation Locations AccessoriesFor an IBM-compatible Computer connection to PCIf you have Windows ’95 or later On Screen Display OSD button - up the Control Indicators - for OSD buttonDescription of Controls Rotary Knob - HelpsUsing the Side Panel OSD OSD Button OSD Menu control level structure How to Use the On Screen Display OSDMain Controls window Smart HelpAfter returning to Exit up CONTRAST Screen Position & Quality window to continue to the Color Temperature window, turn the After each preset setting is saved, the on screen Color Temperature windowD ISPLAY button When done with red, press thePRESETS is Next, press theAfter returning to EXIT Special Controls windowAfter returning to EXIT Smart HelpMake sure you have exited from all icons in a window. See TO EXIT Exit or ResetENTERING SLEEP MODE Additional InformationNO VIDEO INPUT CANNOT DISPLAY THIS VIDEO MODEPin No. Assignment Additional informationScreen says Imaging ProblemsWhat to Do if Something isnt Working No PictureD-Sub Set Up GuideTwo ways of connecting your monitor to your Here are a few definitions that may help you