Apple 150B appendix Installation Locations & Accessories, Correct handling of the monitor

Page 3
Installation Locations & Accessories

Installation Locations & Accessories

Installation Locations

AVOID HEAT AND COLD EXTREMES

Do not store or use the LCD monitor in locations exposed to heat, direct sunlight, or extreme cold.

Avoid moving the LCD monitor between locations with large temperature differences. Choose a site falling within the following temperature and humidity ranges.

Temperature: 5-35°C (40-90°F )

Humidity: 20-80% RH

Do not subject the LCD monitor to severe vibration or high impact conditions. Do not place the LCD monitor inside a car trunk.

Take care not to mishandle this product by either knocking or dropping during operation or transportation.

Do not store or use the LCD monitor in locations exposed to high humidity or dusty environment. Also do not allow water or other liquids to spill on or into the LCD monitor.

E N

Correct handling of the monitor

1.When handling the monitor, grip the bottom firmly with both hands and ensure that the front panel faces outward before lifting. Please refer to the diagram on the right.

2.Handling the monitor with care prevents scratching and damage. If the monitor becomes damaged, immediately disconnect the power from the unit and have it checked by a qualified service person before using it again.

3.Do not drop the monitor to prevent fire or electrical shock.

4.When moving the monitor, be sure to unplug all power cords in order to avoid injury or damage to the equipment.

Accessories

1. Power cable

5. CD-ROM

2. Windows driver disk

6. Warranty Cards

3.Macintosh adapter (optional)

7. Quick Set-up Guide

4. User manual

3

Image 3
Contents Dansk Table of ContentsEnglish FrançaisIntroduction Introduction and SafetyFeatures Safety precautions and maintenanceCorrect handling of the monitor Installation Locations & AccessoriesInstallation Locations AccessoriesFor an IBM-compatible Computer connection to PCIf you have Windows ’95 or later On Screen Display OSD button - up the Control Indicators - for OSD buttonDescription of Controls Rotary Knob - HelpsUsing the Side Panel OSD OSD Button OSD Menu control level structure How to Use the On Screen Display OSDMain Controls window Smart HelpAfter returning to Exit up CONTRAST Screen Position & Quality window to continue to the Color Temperature window, turn the After each preset setting is saved, the on screen Color Temperature windowD ISPLAY button When done with red, press thePRESETS is Next, press theAfter returning to EXIT Special Controls windowAfter returning to EXIT Smart HelpMake sure you have exited from all icons in a window. See TO EXIT Exit or ResetENTERING SLEEP MODE Additional InformationNO VIDEO INPUT CANNOT DISPLAY THIS VIDEO MODEPin No. Assignment Additional informationScreen says Imaging ProblemsWhat to Do if Something isnt Working No PictureD-Sub Set Up GuideTwo ways of connecting your monitor to your Here are a few definitions that may help you