How to Use the On Screen Display (OSD)
Special Controls window
POWER SAVING helps save energy when the monitor is on but not being used. After a preset time, the monitor will go
blank. To select POWER SAVING, follow the steps below.
Press the OSD button.
Turn the ROTARY knob until SPECIAL
CONTROLS is
highlighted. Next, press the OSD button.
ROTARY DEFAULT allows you to pick the feature your ROTARY knob will default to when not used in adjusting your OSD.
The normal default is brightness. To select your ROTARY DEFAULT, follow the steps below.
Press the OSD button.
Turn the ROTARY knob until SPECIAL
CONTROLS is
highlighted. Next, press the OSD button.
E N
Press the OSD button to return to EXIT window.
Turn the ROTARY knob until POWER SAVING is highlighted. Then, press the OSD button.
Turn the ROTARY knob to select
POWER SAVING
ON or OFF.
Press the OSD button to return to EXIT window.
Turn the ROTARY knob until ROTARY DEFAULT is highlighted. Then, press the OSDbutton.
Turn the ROTARY knob to select
BRIGHTNESS,
CONTRAST, or
VOLUME.
Smart Help |
| Smart Help |
After returning to EXIT . . . |
| After returning to EXIT . . . |
. . . to continue to ROTARY DEFAULT, turn the ROTARY knob until |
| . . . to continue to another window, turn the ROTARY knob until |
SPECIAL CONTROL is highlighted. Next, press the OSD button. |
| that window is highlighted. Next, press the OSD button. Follow |
Follow steps |
| the instructions for that window. |
. . . to exit completely, press the OSD button and choose either |
| . . . to exit completely, press the OSD button and choose either |
SAVE or NO SAVE in setting mode, then push OSD button to exit |
| SAVE or NO SAVE in setting mode, then push OSD button to exit |
OSD. (See page 18 for other exit options.) |
| OSD. (See page 18 for other exit options.) |
|
|
|
17