Detailed View of Jumper Pins

Pin 1

To enable CON3 and disable CON1,

transfer jumper to pins 2 & 3 on J1, J2, J3 & J4

To enable CON4 and disable CON2,

transfer jumper to pins 2 & 3 on J5, J6, J7 & J8

Recommendations on using the ADI2S3GPX1-2E

There are two ways of configuring raid sets on the ADI2S3GPX1-2E. Use the RAID BIOS of the controller card which shows up after POST or install the JMB36X RAID Configurer in Windows to create raid volumes. The JMB36X RAID Configurer will not run when no devices are attached to the controller.

Using the RAID BIOS to create RAID Volumes

There are four configurations supported:

RAID level/Type	Configurations	Number of disks needed
RAID 0	Disk Striping	2 or 3 or 4
RAID 1	Disk Mirroring	2
RAID 0+1	Disk Striping + Mirroring	4
JBOD	Disk Concatenation	2 or 3 or 4

RAID 0 (Striping)

1.Press Ctrl+J when prompted to enter the RAID BIOS.

2.At the next screen select Create RAID Disk Drive, press Enter.

3.Enter RAID name, press Enter.

4.Use arrow keys • and •to switch the RAID level to 0-Stripe, then press Enter.

5.Use arrow keys • and •to switch the disk, use the “space” key to mark the selected disk, then press Enter.

6.Use arrow keys • and • to select chunk size from 4K, 8K, 16K, 32K, 64K or 128K, then press Enter.

7.Input the RAID size, press Enter.

8.When asked Create RAID on the select HDD (Y/N)?, press Y to accept.

9.At the next screen select Save And Exit Setup, press Enter.

10.When asked Save to disk &Exit (Y/N)?, press Y to exit the RAID BIOS.

RAID 1 (Mirroring)

1.Press Ctrl+J when prompted to enter the RAID BIOS.

2.At the next screen select Create RAID Disk Drive, press Enter.

3.Enter RAID name, press Enter.

4.Use arrow keys • and •to switch the RAID level to 1-Mirror, then press Enter.

5.Use arrow keys • and •to switch the disk, use the “space” key to mark the selected disk, then press Enter.

6.Input the RAID size, press Enter.

7.When asked Create RAID on the select HDD (Y/N)?, press Y to accept.

8.At the next screen select Save And Exit Setup, press Enter.

9.When asked Save to disk &Exit (Y/N)?, press Y to exit the BIOS.

CONCATENATION (JBOD)

1.Press Ctrl+J when prompted to enter the RAID BIOS.

2.At the next screen select Create RAID Disk Drive, press Enter.

3.Enter RAID name, press Enter.

4.Use arrow keys • and •to switch the RAID level to JBOD-Concatenate, then press Enter.

5.Use arrow keys • and •to switch the disk, use the “space” key to mark the selected disk, then press Enter.

6.Input the RAID size, press Enter.

7.When asked Create RAID on the select HDD (Y/N)?, press Y to accept.

8.At the next screen select Save And Exit Setup, press Enter.

9.When asked Save to disk &Exit (Y/N)?, press Y to exit the BIOS.

RAID 0+1 (Striping + Mirroring)

1.Press Ctrl+J when prompted to enter the RAID BIOS.

2.At the next screen select Create RAID Disk Drive, press Enter.

3.Enter RAID name, press Enter.

4.Use arrow keys • and •to switch the RAID level to 01-Stripe+Mirror, then press Enter.

5.Use arrow keys • and • to select chunk size from 4K, 8K, 16K, 32K, 64K or 128K, then press Enter.

6.Input the RAID size, press Enter.

7.When asked Create RAID on the select HDD (Y/N)?, press Y to accept.

8.At the next screen select Save And Exit Setup, press Enter.

9.When asked Save to disk &Exit (Y/N)?, press Y to exit the BIOS.

ADI2S3GPX1-2E specifications

Addonics Technologies has developed a robust data storage solution with the ADI2S3GPX1-2E, a dual drive enclosure specifically designed for high-performance applications. This innovative product offers an efficient way to manage and store data while ensuring high levels of security and reliability.

One of the standout features of the ADI2S3GPX1-2E is its dual drive support. It accommodates two 2.5-inch SATA drives, allowing users to maximize storage capacity while facilitating easy data redundancy. This is particularly beneficial for businesses and individuals who require dependable backups and want the ease of data recovery.

The device employs advanced RAID technology, supporting RAID 0, RAID 1, and JBOD configurations. RAID 0 enhances performance by striping data across both drives, while RAID 1 provides data mirroring for redundancy, ensuring that data is protected even in the event of drive failure. The JBOD configuration allows for flexible use of drives, making it easy to manage and utilize storage space.

Another key feature is its USB 3.0 interface, which provides high-speed data transfer rates of up to 5 Gbps. This allows users to quickly back up or access large files, significantly improving workflow efficiency. Additionally, the backward compatibility with USB 2.0 ensures that users can integrate the ADI2S3GPX1-2E into a variety of existing systems without any issues.

The enclosure is designed with a durable aluminum housing that not only provides physical protection for the drives but also aids in efficient heat dissipation. This ensures that the drives operate optimally even under heavy workloads, reducing the risk of overheating and subsequent failures.

User-friendliness is another important aspect of the ADI2S3GPX1-2E. The device features a simple plug-and-play setup, allowing users to easily connect it to their computers or servers without complicated installation processes. LED indicators conveniently show the status of the drives and RAID configuration, providing real-time feedback on performance.

In summary, the Addonics Technologies ADI2S3GPX1-2E is a versatile and efficient dual drive enclosure that combines advanced RAID functionalities, high-speed USB connectivity, and a rugged design. Its array of features addresses the diverse needs of users, from high-capacity storage to reliable data protection, making it an ideal choice for both personal and professional use.