Addonics Technologies Z4SNHU3 manual Phone Fax

Page 7

Notes on Spare Drives using the Easy RAID Setting (EZ)

When EZ function is ENABLED, the auto-rebuilding to spare drive is automatic. The degraded RAID group will start rebuilding automatically by using the existing spare drive.

*Spare drive can be either plugged after RAID building or a new drive can be plug as the spare drive when RAID rebuild is required.

When will rebuild action start?

When the raid fails and EZ is enabled, the HPM-XU will automatically rebuild the RAID group using the spare.

When the raid fails and EZ is disabled, the HPM-XU will NOT rebuild the raid group unless you install a good drive to replace the failed drive.

CONTACT US

www.addonics.com

Phone: 408-573-8580

Fax: 408-573-8588

Email: http://www.addonics.com/sales/query/

Image 7
Contents Hours 830 am 600 pm PST Phone Technical SupportDisk Installation InstallationBZS EZ Default factory DIP Switch settingSW1 RAID Setting DIP Switch Port MultiplierBZS EZ M2 M1 M0 Setting the RAID ModeRAID 3 Mode RAID 0 ModeRAID 1& RAID 10 Mode Large ModeRAID Setting Notes Phone Fax