•When the PIP function is ON, select between various input sources of the current video type (Computer Graphic/PC video or Video) for the main window. The cycle will be performed in a specific sequence. Keeping pressing the key will swap the current main window’s signal source with the current PIP window’s signal source. To specify the input signal, release the key while the message displays.
If the current main window source is from the Computer Graphic/PC video input signals, the input signal messages will be displayed in sequence as below:
If the current main window source is from the Video input signals, the input signal messages will be displayed in sequence as below:
The PIP function will not allow for 2 computer graphic/PC video sources or 2 video sources to perform PIP.
To specify an input video source for the PIP window, press Enter to make a selection. See also PIP hot
key on page 26.
PerfectMotion hot key
Press the PerfectMotion key to display the PerfectMotion indicator. Further press the tkey to increase or the ukey to decrease the level of PerfectMotion to the desired value, ranging from 0 to 3, and press the MENU key to exit.
See also PerfectMotion on page 36.
It is recommended that you use this function specially when you are viewing dynamic contents, such as movies, games, etc.
How to adjust your monitor 29