UPort 1100 Series User’s Manual | Installation and Configuration |
Removing the Adaptor
The adaptor is a plug and play device. No special procedures are required to remove the adaptor; you may simply pull the adaptor out of the USB port. You should verify that no data is being transmitted before removing the adaptor.
Removing the adaptor does not remove the drivers. The drivers remain in place so that the adaptor can be automatically detected and installed if it is pluged back into the USB port.
The adaptor can also be uninstalled through the Device Manager, the same as other Windows devices.
Uninstalling the Driver
The UPort driver may be removed through Add/Remove Programs in the Windows Control Panel. Click Remove next to MOXA UPort 1110/1130 Windows Driver Ver1.3.