xp CDR 775/00.1 english
How to record from the internal deck
English | Recording a single track |
| ||||||||
|
|
|
|
|
| EASY JOG |
|
|
| |
|
|
|
|
|
|
| STORE/ CANCEL/ |
| ||
|
|
| CD |
|
|
|
| MENU | DELETE |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| ENTER |
|
|
| OPEN // CLOSE PLAY // PAUSE | STOP | REC | FINALIZE |
|
| EXT |
|
|
|
|
|
| TYPE RECORD | ERASE |
|
|
| |||
|
|
|
|
| SOURCE |
|
|
| ||
|
|
|
|
|
|
|
| CDR |
|
|
|
|
| ANALOG |
| RW |
|
|
|
|
|
|
|
|
|
| CDR 77X | AUDIO CD RECORDER |
|
| ||
|
|
|
|
|
|
|
|
| ||
|
|
| PROG | SHUFFLE | DISPLAY SCROLL |
|
| PHONES | ||
|
|
|
| REPEAT | DJ MODE | |||||
|
|
|
|
|
|
| ||||
These recording modes are ideal for recording tracks from several CD’s. If you are making a compilation CD you can do it either at high speed (RECORD FAST) or while listening to the tracks (RECORD LISTEN). Finalization is not executed automatically.
Preparing
1 Place an unfinalized CDR(W), absolutely free of scratches and dust particles in the left CDR tray.
Place the disc from which you want to record in the right CD tray.
2 With the CD recorder stopped, press REC TYPE one time to select RECORD FAST or two times to select RECORD LISTEN.
➜The display first shows RECORD FAST or RECORD LISTEN.
The fRECORDg label starts blinking. After 3 seconds the display shows the remaining CDR(W) recording time on the left and total time of source on the right. (every 2 seconds PRESS RECORD is displayed.)
3 Program the track(s) for recording.
Press PROG to select one or more tracks for recording (see programming):
-rotate the EASY JOG/ENTER key to the required track number, then press the key (or ENTER on the remote control)
or
-directly select the track number via the
4 Press STOP 9 or PROG to end programming.
➜PROG lights continuously.
Recording
5 Press RECORD to start recording the program.
➜WAIT lights up.The display shows the total remaining time for the selected recording. High speed recording starts. fRECORDg lights continuously.
0For recording from the internal deck (RECORD FAST, REC LISTEN or MAKE CD) we advise you to leave the recording level at its factory setting (0 dB).
Note: It is possible to equalise the recording level of tracks recorded from different CD’s. See the next paragraph.
0To check the track number and track time, press Display. This can be done during recording.
0Recording will stop automatically.
Note: Copy prohibited tracks will be copied analog. ANALOG REC is displayed.
6 To stop recording manually, press STOP 9.
➜UPDATE lights up, fRECORDg goes out and recording stops. (Minimal track length must be
4 seconds otherwise silence will be added to the track.)
7 Press STOP 9 one more time to remove the program of tracks, if any.
8 Insert a new disc from which you want to record and resume at step 1.
0If STOP 9 was pressed within 3 seconds after RECORD, no recording will take place.
0After recording, the display shows UPDATE for several seconds.The Total time indications can differ slightly. However, no music information is lost.
Note: In this Recording mode, the Pause function is not operative.
Finalizing
If you want to play the recorded CD(RW) on a normal CD player, you must first finalize the disc. Please note that you cannot add anymore tracks on a finalized CDR.
See Finalizing CDR and CDRW discs. When all tracks are recorded you can finalize the CDR(W) disc:
9 With the recorder stopped press FINALIZE.
➜The display shows FINALIZE CD and PRESS RECORD.
10 Press RECORD.
➜XX XX FINAL and the approximate finalization time appear on the display.
0The display counts down through the finalization. On completion, the total number of tracks and the total time recorded appears on the display.
0For CDR(W), rchanges to don display. Notes:
Finalizing will take at least 2 - 4 minutes.
During finalization, the CD recorder accepts no operating commands.
When a CDR is finalized no more recordings can be added.
18